You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Post assembly balancing of Y-Branch splitters used in IFOG sensors

    SBC: ADVR, INC.            Topic: N221078

    In this SBIR program, AdvR will develop a new feature in Y-branch dual phase modulator IOCs which enables fine tuning of the split ratio after assembly.  The proposed approach utilizes existing technology with a long flight heritage in tactical gyroscopes to create a tunable section which is localized, finely adjustable and permanent after tuning.  Preliminary modeling indicates the target perfo ...

    SBIR Phase I 2022 Department of DefenseNavy
  2. Alternative Mixing Technologies for High-Energy, Solid Materials for Large Gas Generator Propellant

    SBC: RESODYN CORPORATION            Topic: N172141

    The proposed technology is an advanced method to continuously mix propellants that shortens mixing times, improves safety, reduces costs, and environmental impact. Continuous ResonantAcoustic® Mixing (RAM) quickly mixes highly solids-loaded pastes using acoustic energy with no embedded blades or scrapers reducing the potential for accidents and waste. A RAM based Clean-in-Place process eliminates ...

    SBIR Phase II 2021 Department of DefenseNavy
  3. Family of Foreign Object Damage Mitigation Equipment (F2ME)

    SBC: TRIVERUS LLC            Topic: N192049

    Triverus has developed and transitioned FOD solutions for the Navy shipboard F-35/Harrier programs. The MCRRS technology represents the current state of the art relating to flat surface cleaning with enhanced performance for removing very small to relatively large particles that contribute to Storm Water Pollution (SWPP) and FOD risk. Operationally the MCRRS platform has also been developed to exc ...

    SBIR Phase I 2020 Department of DefenseNavy
  4. Hybridized Silicon Photonics Circuits for Quantum Information Science

    SBC: ADVR, INC.            Topic: N20AT005

    Silicon Q-PICs provide a miniature, stable, and scalable platform for developing future light-based quantum technologies, including sensors, secure communications, and information processors. This is due in large part to leveraging existing semiconductor manufacturing capabilities and the dense integration that the high index contrast of silicon can achieve. In order to fully implement quantum arc ...

    STTR Phase I 2020 Department of DefenseNavy
  5. Active Imaging through Fog

    SBC: Blackmore Sensors and Analytics, Inc.            Topic: N18AT021

    For this Phase 1 Small Business Technology Transfer (STTR) project, Blackmore Sensors and Analytics and university partner Montana State University will investigate the use of coherent frequency modulated continuous wave (FMCW) ladar/lidar and digital holography techniques for improved performance of active imaging through fog. Coherent range, Doppler, and polarization selective digital holography ...

    STTR Phase I 2018 Department of DefenseNavy
  6. Alternative Mixing Technologies for High-Energy, Solid Materials for Large Gas Generator Propellant

    SBC: RESODYN CORPORATION            Topic: N172141

    The Phase I project objective is to develop and demonstrate the feasibility for use of an alternative process for mixing high-energy solid propellant materials that are used for gas generators in U.S. Navy strategic missile post-boost propulsion systems, other large missiles, and launch vehicles. In addition, the advanced mixing technology does not use impellers for mixing. The process selected fo ...

    SBIR Phase I 2018 Department of DefenseNavy
  7. Development and Assessment of No-Impeller, No-Blade Propellant Mixing Equipment and Procedures

    SBC: Highland Point, Inc.            Topic: N172141

    The Phase I effort provides an evaluation of variations of the no-impeller, no-blade propellant mixing approach. The assessment of this technology, specific trade studies of the incorporation of the technology into the propellant manufacturing process, and the accompanying laboratory evaluations demonstrate the feasibility of using this technology to replace the legacy methods for producing substa ...

    SBIR Phase I 2018 Department of DefenseNavy
  8. Novel Composite for High Performance Thermal Interface Material

    SBC: GLACIGEN MATERIALS, INC.            Topic: N171081

    Navy operational needs dictate that thermal interface materials (TIMs) have high thermal conductance, high dielectric strength, form non-permanent bonds, and be resilient to vibration and abrasion. Available TIMs each satisfy a portion of these requirements, but not all of them.Glacigen Materials will develop a new class of TIM by creating a novel composite material. This material will be embodied ...

    SBIR Phase I 2017 Department of DefenseNavy
  9. Metrology of Visibly Opaque, Infrared-Transparent Aerodynamic Domes, Conformal Windows, and Optical Corrector Elements

    SBC: Bridger Photonics, Inc.            Topic: N152105

    There is a growing need to fabricate visibly-opaque, infrared-transparent, high-optical-quality optics that conform to an aircraft’s outer moldline shape to reduce drag. However, fabrication of such free-form and aspheric infrared (IR) optics has proven challenging. The current fabrication bottleneck is in the speed and precision of measuring the optical figure and transmitted wavefront error fo ...

    SBIR Phase II 2017 Department of DefenseNavy
  10. Metrology of Visibly Transparent Large Aspheric Optics

    SBC: Bridger Photonics, Inc.            Topic: N152106

    There is a growing need to fabricate high-optical-quality optics that conform to an aircraft’s outer moldline shape to reduce drag. However, fabrication of such free-form and aspheric optics has proven challenging. The current fabrication bottleneck is in the speed and precision of performing metrology of the optical surfaces because traditional interferometric techniques are not applicable. To ...

    SBIR Phase II 2017 Department of DefenseNavy
US Flag An Official Website of the United States Government