List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Shipboard Dimensional Analysis Tool (SDAT)

    SBC: DESIGN MILL, INC.            Topic: N172101

    Shipboard Dimensional Analysis Tool (SDAT) will enable transportability assessments of candidate vehicle designs aboard Naval ships prior to prototyping. SDAT will integrate three-dimensional (3D) ship and vehicle data, enable users to place and visualize vehicles and their path within ship vehicle stowage spaces and on ramps, enable collision detection based on a user-defined clearance, assess ph ...

    SBIR Phase I 2018 Department of DefenseNavy
  2. Two-Dimensional Surface Emitting Mid-Wave Infrared (MWIR) Interband Cascade Laser Arrays for High-Power Applications

    SBC: Firefly Photonics, LLC            Topic: N181016

    We propose achieving high power mid-infrared arrays with interband cascade vertical cavity surface emitting lasers (VCSEL). Unlike quantum cascade lasers, optical selection rules in interband cascade lasers allow vertical emission. The massive parallelism of a VCSEL array will allow small, low power lasers to achieve high total output power with no speckle due to spatial incoherence across the arr ...

    SBIR Phase I 2018 Department of DefenseNavy
  3. Active Imaging through Fog

    SBC: Blackmore Sensors and Analytics, Inc.            Topic: N18AT021

    For this Phase 1 Small Business Technology Transfer (STTR) project, Blackmore Sensors and Analytics and university partner Montana State University will investigate the use of coherent frequency modulated continuous wave (FMCW) ladar/lidar and digital holography techniques for improved performance of active imaging through fog. Coherent range, Doppler, and polarization selective digital holography ...

    STTR Phase I 2018 Department of DefenseNavy
  4. Alternative Mixing Technologies for High-Energy, Solid Materials for Large Gas Generator Propellant

    SBC: RESODYN CORPORATION            Topic: N172141

    The Phase I project objective is to develop and demonstrate the feasibility for use of an alternative process for mixing high-energy solid propellant materials that are used for gas generators in U.S. Navy strategic missile post-boost propulsion systems, other large missiles, and launch vehicles. In addition, the advanced mixing technology does not use impellers for mixing. The process selected fo ...

    SBIR Phase I 2018 Department of DefenseNavy
  5. Development and Assessment of No-Impeller, No-Blade Propellant Mixing Equipment and Procedures

    SBC: Highland Point, Inc.            Topic: N172141

    The Phase I effort provides an evaluation of variations of the no-impeller, no-blade propellant mixing approach. The assessment of this technology, specific trade studies of the incorporation of the technology into the propellant manufacturing process, and the accompanying laboratory evaluations demonstrate the feasibility of using this technology to replace the legacy methods for producing substa ...

    SBIR Phase I 2018 Department of DefenseNavy
  6. Design Environment for Educator-Student Collaboration Allowing Real-Time Engineering-centric, STEM (DESCARTES) Exploration in Middle Grades

    SBC: Parametric Studio, Inc.            Topic: none

    DESCARTES is a game-based engineering environment where students design, test, and build projects, including boats, airplanes, and other models. The web-based student-facing environment will include challenges, topic introductions, tutorials, and tools for analyzing and improving projects. Following completion of a concept in the environment, students will then build and test real world prototypes ...

    SBIR Phase II 2017 Department of EducationInstitute of Education Sciences
  7. Intranasal Cooling for Encephalopathy Prevention (ICEP)

    SBC: Athena Gtx, Inc.            Topic: N171002

    Traumatic Brain Injury (TBI) is the signature injury of current conflicts accounting for approximately 20-25% combat casualties. Commercially, it is the primary cause of worldwide morbimortality in people under 45 years old. In the USA, TBI is estimated to be 1.5 million cases annually, resulting in over 50,000 deaths which is similar to European numbers. Today, a specific prehospital treatment re ...

    SBIR Phase I 2017 Department of DefenseNavy
  8. Novel Composite for High Performance Thermal Interface Material

    SBC: GLACIGEN MATERIALS, INC.            Topic: N171081

    Navy operational needs dictate that thermal interface materials (TIMs) have high thermal conductance, high dielectric strength, form non-permanent bonds, and be resilient to vibration and abrasion. Available TIMs each satisfy a portion of these requirements, but not all of them.Glacigen Materials will develop a new class of TIM by creating a novel composite material. This material will be embodied ...

    SBIR Phase I 2017 Department of DefenseNavy
  9. Metrology of Visibly Opaque, Infrared-Transparent Aerodynamic Domes, Conformal Windows, and Optical Corrector Elements

    SBC: Bridger Photonics, Inc.            Topic: N152105

    There is a growing need to fabricate visibly-opaque, infrared-transparent, high-optical-quality optics that conform to an aircrafts outer moldline shape to reduce drag.However, fabrication of such free-form and aspheric infrared (IR) optics has proven challenging.The current fabrication bottleneck is in the speed and precision of measuring the optical figure and transmitted wavefront error for the ...

    SBIR Phase II 2017 Department of DefenseNavy
  10. Metrology of Visibly Transparent Large Aspheric Optics

    SBC: Bridger Photonics, Inc.            Topic: N152106

    There is a growing need to fabricate high-optical-quality optics that conform to an aircrafts outer moldline shape to reduce drag.However, fabrication of such free-form and aspheric optics has proven challenging.The current fabrication bottleneck is in the speed and precision of performing metrology of the optical surfaces because traditional interferometric techniques are not applicable.To meet t ...

    SBIR Phase II 2017 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government