List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Advanced Prediction Methods for Augmentative Communication

    SBC: ENKIDU RESEARCH, INC.            Topic: N/A

    Augmentative and Alternative Communication (AAC) devices can provide an effective avenue of communication for individuals with communicative disabilities. A core component of many AAC systems is dynamic word prediction, in which a list of probable words is autonomously generated and presented for immediate user selection. Current word prediction systems employ algorithms which do not take full a ...

    SBIR Phase II 1998 Department of Education
  2. Development of a Tactile Graphic User Interface

    SBC: Touch Graphics, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Education
  3. Diamond-Like Nanocomposites (DLN) as a Protective, Wear Resistant Thin Film for'Sliding Electrical Contacts.

    SBC: ADVANCED REFRACTORY TECHNOLOGIES, INC.            Topic: N/A

    A novel coating technology is proposed for increased wear and improved li fe and reliability of commutator bars in electrical sliding devices found in manned and unmanned underwater vehlilles. Diamond-Like Nanocomposite (DLN) coatings represent a famil Of thiWrfilms that bxhibit unique combinations of technologically interesting properties including high adhesion to virtually any substrate (inclu ...

    SBIR Phase II 1998 Department of DefenseNavy
  4. Acoustic Interference Rejection

    SBC: Advanced Acoustic Concepts, Inc.            Topic: N/A

    This SBIR project will determine the feasilibility of acoustic interference rejection techniques for a submarine acoustic intercept system. The signal processing techniques developed will permit the continuous tracking of active weapon sonars in the presence of interference from countermeasures and other sources. Existing submarine acoustic sensors will be used. Multiple emitter location techniq ...

    SBIR Phase I 1998 Department of DefenseNavy
  5. Corrosion Resistant Composite Launch Tube for Out Board Submarine System

    SBC: BELTRAN, INC.            Topic: N/A

    The project is dedicated to the development of a composite construction for the launch tube of an out board submarine system that would attain an extended service life of 10 years. This is a complex R&D project that includes: determination of design parameters of operational force-temperature-time conditions; selection of the appropriate structural and refractory coating materials; selection of a ...

    SBIR Phase I 1998 Department of DefenseNavy
  6. Superconducting tunable multipole bandpass filter with in-situ trim

    SBC: HYPRES, INC.            Topic: N/A

    In this Phase I SBIR project, HYPRES proposes to demonstrate a tunable lumped-element superconducting bandpass filter for transmit/receive isolation applications, using Josephson circuits for in situ trim and control. Such a filter will provide insertion loss below 1 dB and 60 dB out-of-band rejection in a filter which can be tuned over the range 500 MHz - 2 GHz. The project will take advantage o ...

    SBIR Phase I 1998 Department of DefenseNavy
  7. Advanced Fiber Optic Link Simulator

    SBC: RSOFT DESIGN GROUP            Topic: N/A

    In the continually advancing information age, the needs for rapid and high-performance data communications capabilities are increasing exponentially. The capabilities of strictly electronic communications technologies cannot keep pace with these rapidly increasing demands, and optoelectronics and fiber optics technologies have stepped in to meet the challenge. Fiber optics are now heavily used in ...

    SBIR Phase I 1998 Department of DefenseNavy
  8. Induction Carburizing--A Novel Cost Effective, Environmentally Safe, Affordable Technology

    SBC: SANOVA LLC            Topic: N/A

    Carburizing of steels to improve wear resistance is an old but widely used process. Current furnace technologies are expensive because their extensive requirements for time, space, labor, materials, energy and maintenance, and are harmful to the enviroment due to active atmosphere and heat losses. Separate equipment is needed to establish desired properties in the part case and core. The proposed ...

    SBIR Phase I 1998 Department of DefenseNavy
  9. Small, Rugged Internal Combustion Engine

    SBC: Veritay Technology, Inc.            Topic: N/A

    The Department of Defense has a growing interest in unmanned aerial vehicles (UAVs) to provide over-the-horizon surveillance, detection, classification and destruction of time-critical surface targets. Forward Area Support Munition (FASM), a Navy ATD program approved for FY99 start, is a 5-inch gun-launched projectile that transforms into a propeller propelled UAV. A future engine for the system ...

    SBIR Phase I 1998 Department of DefenseNavy
  10. Develop a Lightweight Electronic Equipment Enclosure

    SBC: Xc Associates, Inc.            Topic: N/A

    The Navy is imposing weight limits on the Cooperative Engagement (CeC) Program, the electronic equipment racks presently used by the Navy are very heavy and expensive to produce, this Program will develop a lightweight rack which will meet the operational requirements and be less expensive to product. Military systems are becoming increasingly complex and have to meet a larger arra of requirement ...

    SBIR Phase II 1998 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government