Award Data

Bridger Photonics proposes developing an optical metrology probe with a wavelength greater than 2 microns capable of transmitting through key infrared materials, achieving

Bridger Photonics proposes developing a disruptive metrology probe capable of achieving 1 kHz update rates and measurement ranges exceeding 10 cm. This probe will be coupled with OptiPro Systems' 5-axis air-bearing UltraSurf stage to provide optical figure and transmitted wavefront error of large aspheric optics including conformal windows, aerodynamic domes, and corrector optics.

Resodyn Corporation proposes to develop a single tough thermoplastic polymer coating material and system solution for aluminum and composite boat hulls. The coating functions as an adhesive for attaching doubler plates. It encapsulates and prevents water from corroding metal substrates plus it is hydrophobic and can include corrosion inhibitors and colorant. Basic polymer components are tough ther ...

To address the Navy's needs for a multi-band, pulsed, high average power transmitter for IRCM applications, Bridger Photonics, Inc., in collaboration with NP Photonics proposes a novel solution for nonlinear frequency conversion of a unique 2.0 micron Thulium fiber laser that will achieve the Navy"s desired laser specifications in a single, compact, and efficient package. This system will cap ...

S2 Corporation and subcontractor Montana State University offer their wideband photonic technologies for signal generation and sensing and a workplan to address the needed novel characterization techniques for passive components operating over very wide bandwidth, at frequencies up to 110 GHz. In the Phase 1 effort, we will develop concepts for very wide bandwidth, very high frequency passive comp ...

Quantifying oceanic CO2 uptake and ocean acidification and understanding their impact on global climate and ocean ecology are key goals of NOAA’s climate change research programs. NOAA’s request for Development of a long-term Lagrangian pH and pCO2 drifter (SBIR Subtopic 8.3.1C) aims to address these goals by developing technology that measures both pCO2 and pH that can be widely deployed in t ...

Under this proposed SBIR effort, Bridger Photonics, Inc. (Bridger) will advance its industry-leading length metrology capabilities to reach sub-10-nanometer precision,>40 Hz update rate,>10 cm measurement range, and sufficient sensitivity to enable measurement of high reflection angles (>5 degrees) on ceramic materials with bulk scattering. Bridger will integrate this metrology system with OptiPro ...

This Phase II proposal addresses the need for an innovative, affordable spray-on material system that mitigates low frequency acoustic radiation through a ship hull induced by airborne noise in shipboard compartments containing various electro-mechanical systems. The Phase I project objectives were fully achieved and the results exceeded the U.S. Navy project requirements. The acoustic mitigation ...

The objectives of the base project are three-fold: 1) An existing prototype hardware spectrum analyzer receiver system will be enhanced, tested in house, and ruggedized to enable it to be field tested at a federal test site (in the option). Work will focus on dynamic range improvements, continuous time coverage, and aims for innovation with multi-stage processing approaches to be analyzed and demo ...