You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. SBIR Phase II: Mobile Plastic Ocean Waste Recycler

    SBC: PKS CONSULTING, INC.            Topic: 5B

    Plastic Ocean Waste (POW) is accumulating in our oceans and on our beaches at an accelerating rate. Eight million metric tons (8M MT) of plastic is entering the world's oceans each year at a rate of one ton per minute. Alaska represents 53% of the U.S. coastline. During Phase I, we estimated the amount of POW accumulating on Alaska's shorelines at 34,500 to 51,700 MT/yr at a rate of three ton per ...

    SBIR Phase II 2022 Environmental Protection Agency
  2. Hydrothermal Alkaline Treatment of PFAS Contaminated Water and Groundwater

    SBC: Aquagga, Inc.            Topic: 20OSAPE3A

    Per-and polyfluoroalkyl substances (PFAS) have been used extensively since the 1940s due to their chemical stability and unique thermophysical properties. Those same properties make PFAS extremely recalcitrant environmental pollutants, and bioaccumulative toxins. Regulations are rapidly being established by U.S. states, including Michigan, New Hampshire, and New Jersey, beholding municipal water u ...

    SBIR Phase I 2021 Environmental Protection Agency
  3. Mobile Plastic Ocean Waste Recycler

    SBC: PKS CONSULTING, INC.            Topic: 20OSAPE5B

    The Environmental Protection Agency is seeking proposals that will improve the U.S. recycling system.PKS Consulting is an Alaska-based small technology firm that proposes the development of a Mobile Plastic Ocean Waste (POW) Recycler that can be moved from community to community to produce Recycled Plastic Lumber (RPL) products from locally collected POW. Fishing gear is primarily composed of Poly ...

    SBIR Phase I 2021 Environmental Protection Agency
  4. Removing PFAS in Investigation Derived Wastes (IDW) with Electrocoagulation and Electrochemically Activated Persulfate

    SBC: AirLIft Environmental LLC            Topic: 19NCER3A

    Repeated use of aqueous firefighting foams containing per- and polyfluoroalkyl substances (PFAS) has contaminated hundreds of sites. To delineate the extent of contamination, many of these sites are undergoing intensive site investigations and generating large quantities of investigation derived wastes (IDW). Current disposal practices of landfilling or incineration are costly and burdensome. This ...

    SBIR Phase I 2020 Environmental Protection Agency
  5. Drone-Based Gas Mapping LiDAR for Leak Mitigation

    SBC: Bridger Photonics, Inc.            Topic: 17NCER2C

    Bridger Photonics, Inc. proposes developing a drone-based Gas Mapping LiDAR™ sensor to mitigate the loss of valuable product across the Oil & Gas supply chain.The sensor will uncover leaks and physical changes to infrastructure and pipeline right-of-ways using high-resolution 3D topographical imagery with methane gas concentration overlays.The technology will enable reliable detection, precise l ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. Absolute Distance Interferometer for Manufacturing Metrology Applications

    SBC: Bridger Photonics, Inc.            Topic: NA

    Bridger Photonics, Inc. proposes to develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  7. Absolute Distance Interferometer for Manufacturing Metrology Applications

    SBC: Bridger Photonics, Inc.            Topic: 90101

    Bridger Photonics, Inc. will develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, AFM, SE ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  8. Direct Conversion of Organic Municipal Solid Waste to Lipids using an Extremophilic Fungus

    SBC: SUSTAINABLE BIOPRODUCTS LLC            Topic: 13NCERC2

    The United States produces significant quantities of waste materials that are discarded. These wastes include organic components of municipal solid waste (MSW), biosolids from wastewater treatment plants and agricultural wastes. The release of these materials and their byproducts into the environment can have serious consequences, such as pollution of ground and surface water resources and spread ...

    SBIR Phase II 2015 Environmental Protection Agency
  9. Direct Conversion of Municipal and Agricultural Wastes to Biodiesel and Ethanol Utilizing a Unique Extremophilic Fungus

    SBC: SUSTAINABLE BIOPRODUCTS LLC            Topic: C

    Sustainable Bioproducts LLC’s proposed research will further develop an efficient, economical and scalable process for conversion of municipal solid wastes and agricultural wastes to biodiesel and ethanol. The technology is based on use of a novel extremophilic fungus, named strain MK7, which thrives in pH 1.2 bison dung ingeothermal habitats of Yellowstone National Park. The United States produ ...

    SBIR Phase I 2014 Environmental Protection Agency
  10. Atmospheric Characterization for Directed Energy Applications

    SBC: ANASPHERE, INC            Topic: MDA12017

    Atmospheric refractive index fluctuations directly impact the propagation of laser beams through the atmosphere. A key parameter of interest to be directly acquired or derived from atmospheric measurements is the refractive index structure parameter CN2. Atmospheric refractive index, and therefore CN2, can theoretically be derived as a function of temperature, humidity, and pressure measurements ...

    SBIR Phase I 2013 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government