List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Waterproofing Cargo Airdrop Equipment

    SBC: RESODYN CORPORATION            Topic: A16114

    The U.S. Army is interested in the development of innovative coating technologies to allow current U.S. Army airdrop related hardware and equipment to survive fresh and salt water operations with increased reliability and without damage and significant maintenance impact. Resodyn Corporation proposes for development a durable, moisture-impermeable, thermoplastic coating material to address the U.S ...

    SBIR Phase II 2019 Department of DefenseArmy
  2. Durable. Textured, Thermoplastic Coatings for External Drum Dynamometers

    SBC: RESODYN CORPORATION            Topic: AF182023

    The U.S. Air Force is interested in the development of a texture coating application method to produce simulated runway surface coatings that can survive on external drum dynamometers during aircraft tire/wheel/brake testing. Resodyn Corporation proposes the development of pavement-like coatings (PLC) suitable for Polymer Thermal Spray (PTS) deposition in order to address the U.S. Air Forces need ...

    SBIR Phase I 2019 Department of DefenseAir Force
  3. Drone-Based Gas Mapping LiDAR for Leak Mitigation

    SBC: Bridger Photonics, Inc.            Topic: 17NCER2C

    Bridger Photonics, Inc. proposes developing a drone-based Gas Mapping LiDAR™ sensor to mitigate the loss of valuable product across the Oil & Gas supply chain.The sensor will uncover leaks and physical changes to infrastructure and pipeline right-of-ways using high-resolution 3D topographical imagery with methane gas concentration overlays.The technology will enable reliable detection, precise l ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Alternative Mixing Technologies for High-Energy, Solid Materials for Large Gas Generator Propellant

    SBC: RESODYN CORPORATION            Topic: N172141

    The Phase I project objective is to develop and demonstrate the feasibility for use of an alternative process for mixing high-energy solid propellant materials that are used for gas generators in U.S. Navy strategic missile post-boost propulsion systems, other large missiles, and launch vehicles. In addition, the advanced mixing technology does not use impellers for mixing. The process selected fo ...

    SBIR Phase I 2018 Department of DefenseNavy
  5. Development and Assessment of No-Impeller, No-Blade Propellant Mixing Equipment and Procedures

    SBC: Highland Point, Inc.            Topic: N172141

    The Phase I effort provides an evaluation of variations of the no-impeller, no-blade propellant mixing approach. The assessment of this technology, specific trade studies of the incorporation of the technology into the propellant manufacturing process, and the accompanying laboratory evaluations demonstrate the feasibility of using this technology to replace the legacy methods for producing substa ...

    SBIR Phase I 2018 Department of DefenseNavy
  6. Fuel Efficiency Improvements for Amphibious Vehicles

    SBC: PACIFIC ENGINEERING INC.            Topic: N162079

    This Phase II project goal is to develop solutions that improve the fuel efficiency of Amphibious Vehicles. Amphibious vehicles operate on the leading edge of an assault and in environments where ongoing access to fuel is limited. More efficient fuel usage will also enable longer mission durations and increased operating ranges. The goal is to reduce fuel usage over the Amphibious Vehicle mission ...

    SBIR Phase II 2018 Department of DefenseNavy
  7. Real-Time Metrology and Feedback Control for Additive Manufacturing

    SBC: Bridger Photonics, Inc.            Topic: SB163004

    SBIR Topic SB163-004 describes DARPAs need to develop a real-time system for active feedback control and process characterization of multi-material additive manufacturing. To fill this need, Bridger Photonics, Inc. (Bridger) will prove out an ...

    SBIR Phase I 2017 Department of DefenseDefense Advanced Research Projects Agency
  8. Fuel Efficiency Improvements for Amphibious Vehicles

    SBC: PACIFIC ENGINEERING INC.            Topic: N162079

    The output of this Phase I will be several lighter weight ACV 1.1 potential candidates, these include components within the land and marine propulsion systems (drive shafts and propeller), hull shapes (bow vane and stern/trim flaps) as well as doors, hatches, inlet grill, exhaust ducts and grills. These components will take advantage of the ideal properties that composite has to offer: lightweight ...

    SBIR Phase I 2017 Department of DefenseNavy
  9. Removable and Maintainable Future Hull Arrays

    SBC: PACIFIC ENGINEERING INC.            Topic: N171072

    PEI is proposing to design and develop a composite frame structure which will serve as the foundation and means for easy assembly and removal of either array sections, modules or individual vertical block staves (VBS). PEI will develop structural technologies for building and installing these large conformal arrays to the exterior hull. PEI technology will be expanded to allow conformal sonar arra ...

    SBIR Phase I 2017 Department of DefenseNavy
  10. Novel Composite for High Performance Thermal Interface Material

    SBC: GLACIGEN MATERIALS, INC.            Topic: N171081

    Navy operational needs dictate that thermal interface materials (TIMs) have high thermal conductance, high dielectric strength, form non-permanent bonds, and be resilient to vibration and abrasion. Available TIMs each satisfy a portion of these requirements, but not all of them.Glacigen Materials will develop a new class of TIM by creating a novel composite material. This material will be embodied ...

    SBIR Phase I 2017 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government