List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Reducing Diesel Soot with an Atmospheric Plasma Metallic Filter

    SBC: Atmospheric Glow Technologies            Topic: N/A

    The majority of buses, heavy-duty fleet vehicles, and construction and farm machinery are equipped with diesel engines. The diesel engine is an energy-efficient machine, but its exhaust emissions present a serious health and environmental problem. Drastic reductions of exhaust soot have been mandated throughout the world, including the recent U.S. Environmental Protection Agency (EPA) mandate to r ...

    SBIR Phase I 2001 Environmental Protection Agency
  2. Innovative Sonic Technology for Ex-Situ Treatment of Mercury Contaminated Waste

    SBC: RESODYN CORPORATION            Topic: N/A

    A novel combination of technologies is proposed by Montec Research to improve ex situ mercury remediation. The combination of acoustic agitation, iodine leaching chemistry, and real-time management of leach oxidation potential will allow mercury to be extracted economically from soils, sediments, and debris. Additional residue-washing steps are proposed to help residues pass the Universal Treatmen ...

    SBIR Phase I 2001 Environmental Protection Agency
  3. Metals Recycling from Waste Sludges by Ammoniacal Leaching Followed by Solvent Extraction

    SBC: Mse Technology Applications, Inc.            Topic: N/A

    The Phase I objective is to demonstrate the feasibility of applying recently developed enhanced ammoniacal leaching techniques and solvent extraction reagents to recycle nickel, copper, cobalt, zinc, and cadmium from hydroxide sludges such as those produced by electroplating shops, metal finishers, treatment of acid mine drainage, and industrial wastewater in general. Electroplating sludges, class ...

    SBIR Phase I 2001 Environmental Protection Agency
  4. A Process for On-Line Quality Control of Recycled Plastic Flake

    SBC: National Recovery Technologies LLC            Topic: N/A

    Generally, it is accepted that for plastics recycling to be economically viable in the long term, recycled resins must be competitive with virgin resins. To compete with virgin material, new applications must be made available for recycled resins. Such applications will require that the recycled resin be of a high purity level. Thus, many processors are requiring ever-tightening contamination limi ...

    SBIR Phase I 2001 Environmental Protection Agency
  5. Sensor Fusion for Contaminant Detection and Removal from Plastic Recycle Streams

    SBC: National Recovery Technologies LLC            Topic: N/A

    Post-consumer plastics have become a tremendous burden upon our waste disposal system. Although plastics constitute only about 9 percent by weight of municipal solid waste, they occupy approximately one-fourth the volume of the waste stream. The U.S. EPA recommends recycling of plastics as the best solution to the problem. However, contamination of plastics within the recycle stream by foreign mat ...

    SBIR Phase II 2001 Environmental Protection Agency
  6. Sensor Fusion for Contaminant Detection and Removal from Plastic Recycle Streams

    SBC: National Recovery Technologies LLC            Topic: N/A

    Post-consumer plastics have become a tremendous burden upon our waste disposal system. Although plastics constitute only about 9 percent by weight of municipal solid waste, they occupy approximately one-fourth the volume of the waste stream. The U.S. EPA recommends recycling of plastics as the best solution to the problem. However, contamination of plastics within the recycle stream by foreign mat ...

    SBIR Phase I 2001 Environmental Protection Agency
  7. Development of Recycled Glass Paving Materials

    SBC: Sandhill Industries            Topic: N/A

    Sandhill Industries, a woman-owned small business and manufacturer of glass wall and floor tile, has developed a process for manufacturing paving products made from 99 percent recycled soda-lime plate or container glass. The glass pavers are thinner, lighter, denser, stronger, and perform better in paving applications than brick or concrete. Furthermore, the manufacture of the glass pavers generat ...

    SBIR Phase I 2001 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government