List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Haptic Feedback Improvements for Prostheses

    SBC: Orthocare Innovations LLC            Topic: 84133S2

    This project optimizes haptic system design parameters and more thoroughly evaluates the impact of a vibratory haptic system for prosthetics. Objectives include: (1) building a hardware and software test bed for non-invasive voluntary control of a prosthetic hand with vibratory haptic feedback, (2) optimizing the tactor application, (3) assessing the effectiveness of tactor vibratory feedback on c ...

    SBIR Phase II 2011 Department of Education
  2. Dropsonde System for Unmanned Aerial Vehicles

    SBC: Anasphere, Inc            Topic: S309

    A small, modular dropsonde launcher is being developed for Unmanned Aerial Vehicles (UAVs). Some critical measurement needs can only be satisfied by in-situ measurements. Key examples of such measurements include detailed atmospheric profiles, point meteorological conditions on the surface, and in-situ measurements for calibration and validation of remote sensing systems.Phase I work saw the des ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  3. High Fidelity Down-Conversion Source for Secure Communications using On-Demand Single Photons

    SBC: ADVR, Inc            Topic: O105

    In this NASA SBIR Phase II effort, AdvR will design and build an efficient, fully integrated, waveguide based, source of spectrally uncorrelated photon pairs that will enable accelerated research and development in the emerging field of quantum information science. The key innovation is the use of sub-micron periodically poled waveguides to produce counter propagating photon pairs using quasi-phas ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  4. Fiber Coupled Pulse Shaper for Sub-Nanosecond Pulse Lidar

    SBC: ADVR, Inc            Topic: S101

    This Small Business Innovation Research Phase II effort will develop an all-diode laser and fiber optic based, single frequency, sub-nanosecond pulsed laser source for high resolution lidar applications benefiting SLR, LIST and DESDynI missions. This laser will have a user adjustable pulse width from 2ns to 400ps and will be ideal for seeding high power fiber amplifiers for short pulse, high reso ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  5. Low Mass Electromagnetic Plasmoid Thruster with Integrated PPU

    SBC: MSNW, LLC            Topic: S304

    The Electromagnetic Plasmoid Thruster (EMPT) is a revolutionary electric propulsion thruster and power processing (PPU) system that will allow a dramatic decrease in system mass and increase in thrust efficiency over traditional 500-3000 W propulsion systems. The high specific power (>700 W/kg) and high efficiency of EMPT will enable a wide range of deep space missions such as Neptune, Pluto an ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  6. Discrete Geometry Toolkit for Shape Optimization

    SBC: Optimal, LLC            Topic: A208

    Simulation-based design optimization has been steadily maturing over the past two decades, but not without its own unique and persistent challenges. The proposed project will develop a novel solution to one of the long-standing bottlenecks in simulation-based design optimization. Particularly, we will develop a flexible geometry toolkit for shape parameterization and modification as required for d ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  7. Integrated Planar Lightwave Circuits for UV Generation and Phase Modulation

    SBC: ADVR, Inc            Topic: S101

    The primary goal of this SBIR effort is delivery of a compact, robust, highly efficient, fiber-coupled UV module to provide the required 355nm light for integration into HSRL's UV interferometric-based measurement system. An additional goal of this effort is to prototype a compact, robust, fiber-coupled UV PLC module which produces the required spectrally formatted 355nm light for stabilizat ...

    SBIR Phase II 2011 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government