You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation

    SBC: ADVR, INC.            Topic: N/A

    This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  2. High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal

    SBC: ADVR, INC.            Topic: N/A

    This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  3. Chemometric Support for Temperature-programmed Sensing System

    SBC: Eigenvector Research, Inc.            Topic: N/A

    The Temperature Programmed Sensing (TPS) system developed at NIST presents many opportunities and unique challenges. The data output from the system can be quite complex and there are many opportunities to optimize the system for specific sensing scenarios. We propose a program aimed at characterizing the system so that potential problems (such as system drift) can be solved early so that the full ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  4. Utility Arm ¿An Upper Limb Prosthesis

    SBC: MOTION CONTROL, INC            Topic: N/A

    Motion Control will develop an innovative body-powered (BP) upper extremity (UE) prosthetic system which offers substantial improvements in functionality, comfort, and aesthetics, for persons with UE deficiencies at all levels. This “Utility Arm” system will in¬crease independence and work capabilities for users of arm prostheses, with less com-plexity than a full myoelectric arm system, and ...

    SBIR Phase II 2009 Department of Education
  5. New Electro-Hydraulic Foot Prosthesis.

    SBC: MOTION CONTROL, INC            Topic: N/A

    Motion Control, Inc. (MCI) will complete an electronic-controlled version of the advanced hydraulic foot/ankle which will demonstrate the feasibility of the automatic adjustment of resistance throughout the range of motion. The advanced MCI Foot, especially the automatic controlled version, is expected to contribute to the function of the prosthesis wearer, resulting in advanced and more natural ...

    SBIR Phase I 2009 Department of Education
  6. Haptic Feedback Improvements for Prostheses

    SBC: ORTHOCARE INNOVATIONS LLC            Topic: N/A

    Haptic feedback improvements for prostheses tactile sensory feedback or haptic is a fundamental element of life. While vital for interaction with the outside world, current prostheses do not have a mechanism to convey sensory information, making it difficult for users to feel connected to their environments through their prostheses, and to engage in active grasping and exploration tasks. Benefit ...

    SBIR Phase I 2009 Department of Education
  7. N/A

    SBC: Alpine Media            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of Education
  8. A Project to Assist Children in Classrooms to Successfully Communicate with Their Handicapped Peers (Project Child-to-Child)

    SBC: HOPE, Inc.            Topic: N/A

    Not Available The high performance, high power density combustors being proposed for IHPTET III must operate without exhinbintng combustion instability. There is a need to develop a time-accurate CFD combustion dynamics code that provides improved understanding of the acoustic/heat-release coupling and is able t predict the frequency and limit cycle of the instability. The code also needs to be p ...

    SBIR Phase I 1999 Department of Education
  9. An Interpretable Internet Based Multimedia Authorware that Facilitates a Collaborative Learning Environment

    SBC: Rodriquez & Harris, Llc            Topic: N/A

    Not Available We propose a proof of concept demonstration of micro-balloon vortex generators and micromachined hot film sensor arrays for active control of flow separation. This program is the first step toward the development of conformal micro-balloon vg appliques. Appliques fabricated with co-located microsensors and balloon vg's will provide a revolutionary closed loop, seamless flow control ...

    SBIR Phase I 1999 Department of Education
US Flag An Official Website of the United States Government