You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Periodically Poled Materials for UV Generation

    SBC: ADVR, Inc            Topic: A09AT008

    Army quantum information researchers have an immediate need for improved stable, narrowband violet and UV laser sources with 10–100 mW output and 10 MHz–10 GHz tuning. These sources are required for numerous ion and atom qubits functions including photoionization, Doppler cooling, state initialization, and detection. The cost and complexity of currently available UV lasers hampers current ef ...

    STTR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  2. High Energy Micro Rocket Stages for Tactical & Space Applications

    SBC: ANDREWS SPACE, INC.            Topic: SB091013

    Andrews Space, Inc. proposes to test new high energy density propellant combinations and conduct a feasibility study on their applications. These propellants are enablers for use in high performance tactical missiles, high delta-V single stage vehicles such as a suborbital point to point vehicles, and compact high energy upper stages. Our Phase I approach is to develop stage and vehicle designs ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  3. Ceramic Matrix Composite Materials for Arc Light Hypersonic Tactical Strike

    SBC: ANDREWS SPACE, INC.            Topic: NASAX70408

    Andrews Space has shown under a recently completed DARPA study for the Long Range Time Critical Strike initiative that a morphing wing hypersonic vehicle that uses deployable aerosurfaces can very effectively extend the range and decrease the time to target for munitions launched within the constraints of existing launch platforms. The key enabling technology is a composite material that is flexib ...

    SBIR Phase II 2009 Department of DefenseDefense Advanced Research Projects Agency
  4. Robotic System for Natural Orifice Transluminal Endoscopic Surgery

    SBC: SPI Surgical, Inc            Topic: A09AT029

    Our project will focus on the development of a bendable, maneuverable, robotically-assisted endoscopic sheath, with two or more flexible video endoscopes to provide visualization, and flexible instruments which can be used inside this sheath. This will provide new ability to access difficult to reach corners not only in the field of minimal access surgery, but also during open surgery. Applicati ...

    STTR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  5. Surgical Cockpit-- Multisensory/Multimodal Interfaces for Robotic Surgery

    SBC: SPI Surgical, Inc            Topic: A09AT028

    The ongoing military conflicts in both Iraq and Afghanistan are conducted under conditions quite different from previous conflicts and demonstrate the need to deploy skilled personnel equipped with advanced technology to provide medical and surgical attention as close as possible to the point of injury. A major problem is the occasional mismatch between the type of injury and the type of surgeon a ...

    STTR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  6. RF Fiber-optic links using LiNbO3 Device with Improved Efficiency and Filtering

    SBC: Eospace Inc.            Topic: SB082039

    The objective is to develop an ultra-high performance RF fiber-optic links using LiNbO3 device with improved efficiency and optical filtering techniques. To goal is to achieve an RF fiber-optic link with optimized SFDR, Link Gain and low Noise Figure simultaneously. The effort includes the development of higher efficiency lithium niobate modulator and analyzing optical filtering techniques for app ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  7. High Performance Millimeter-Wave Frequency-Agile Optical Modulators

    SBC: Eospace Inc.            Topic: SB082038

    Electro-Optic Frequency-Agile ModulatorsThe objective is to develop an ultra-high performance optical frequency-domain modulation device that is truly frequency agile and capable of operation from DC to mm-wave frequencies for the next generation optical signal generation and signal transmission system for dual-use in defense/RF-analog and commercial/digital “Ultra-high-bit-rate” fiber-optic c ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  8. Fabrication of Structural MLI Using 3D Printing Technologies

    SBC: TETHERS UNLIMITED, INC.            Topic: SB082008

    We propose to utilize a combination of 3D printing technology and high-strength, temperature-resistant composites to create structural components for spacecraft that incorporate an integral thermal barrier. The use of 3D printing technology will enable rapid fabrication of complex structural components to enable responsive configuration and production of satellites to meet time-critical tactical ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  9. Multi-Axis Doppler Direction Finder System for Relative Position and Attitude Determination

    SBC: TETHERS UNLIMITED, INC.            Topic: SB072039

    Interest in formation and cluster-based satellite applications has grown considerably in recent years. These applications require a relative position and attitude sensor to address challenges such as station keeping, collision avoidance, and relative orientation control. Existing sensors that have been in use for years on missions requiring vehicle docking are typically not suitable for use on mic ...

    SBIR Phase II 2009 Department of DefenseDefense Advanced Research Projects Agency
  10. Continuous Detonation Rocket and Air Breathing Engines

    SBC: GHKN Engineering, LLC            Topic: SB082059

    This proposal describes an approach to evaluate the continuous detonation phenomenon using a computational fluid dynamics (CFD) method for analyzing the critical factors needed to create a model of the detonation physics in a simulated engine. The work perfomed to define the operating parameters will be conducted using a program called MaxS as the primary tool. This program has been shown to provi ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government