You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Absolute Distance Interferometer for Manufacturing Metrology Applications

    SBC: Bridger Photonics, Inc.            Topic: NA

    Bridger Photonics, Inc. proposes to develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  2. Absolute Distance Interferometer for Manufacturing Metrology Applications

    SBC: Bridger Photonics, Inc.            Topic: 90101

    Bridger Photonics, Inc. will develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, AFM, SE ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  3. Environmentally Friendly Low Friction Coating for Concrete Barriers

    SBC: RESODYN CORPORATION            Topic: 121FH1

    Resodyn Corporation is proposing a material and application system that will create a low friction coating on concrete median barriers. The advanced material developed for the low friction coating is an affordable, tough, weather resistant, and environmentally friendly copolymer. The proposed application concept is for truck mounted equipment that enables a single pass application of the coating ...

    SBIR Phase I 2012 Department of Transportation
  4. Production Methods and Software for NIST Calibration Phantoms

    SBC: SIGMA K CORP            Topic: N/A

    Magnetic Resonance Imaging data needs to be calibrated using a universal standard. NIST and the ISMRM SQRM committee have developed the NIST/NIST MR phantom. The group had two phantoms manufactured to their specifications and these phantoms have been imaged at numerous imaging facilities. Sigma-K now proposes to develop a complete manufacturing method that will produce 50 MRI phantoms. These phant ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  5. Public Rights-of-Way Assessment Instrumentation to Determine Accessibility

    SBC: BENEFICIAL DESIGNS INC            Topic: 081FH2

    City planners and engineers need detailed assessments of public rights-of-way to evaluate existing conditions, determine compliance with draft accessibility guidelines, and plan reconstruction projects. Current assessment methods are inadequate and inefficient due to the time and resources required. This project will develop an automated public rights-of-way assessment process and the measuremen ...

    SBIR Phase II 2010 Department of Transportation
  6. Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation

    SBC: ADVR, INC.            Topic: N/A

    This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  7. High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal

    SBC: ADVR, INC.            Topic: N/A

    This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  8. High Efficiency Single Photon Up-Conversion in Waveguides and Pump Wavelength Longer than the Signal Wavelength

    SBC: ADVR, INC.            Topic: N/A

    This NIST Phase 1 SBIR effort will demonstrate the feasibility of low noise single photon up conversion using KTiOPO4 (KTP) or LiNbO3 (LN) or Stoichiometric LiTaO3 (SLT) periodically poled waveguides and an 1800nm pump for a high efficiency single photon detector. The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher efficiency s ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  9. Public Rights-of-Way Assessment Instrumentation to Determine Accessibility

    SBC: BENEFICIAL DESIGNS INC            Topic: N/A

    Cities must perform detailed assessments of sidewalks and streets, including curb ramps, pedestrian signals, crosswalks, street furniture, and other components to determine compliance with the Public Rights-of-Way Accessibility Guidelines. However, current assessment methods are inadequate or unreasonable due to time and resources required. The objectives of this project are to: 1) develop elect ...

    SBIR Phase I 2008 Department of Transportation
  10. Phase II: EcoSod An Alternative Native Sod Solution for Highway Construction

    SBC: Bitterroot Restoration Inc.            Topic: N/A

    The Surface Transportation and Uniform Relocation Assistance Act requires the use of native grasses and wildflowers within highway corridors. A major problem for the revegetation industry has been the ability to predictably establish native vegetation from seed. The production of native sods would allow for the most sensitive period of establishment-germination and initial seedling growth-to be ...

    SBIR Phase II 2006 Department of Transportation
US Flag An Official Website of the United States Government