Award Data

Face masks and respirators are frequently deployed in critical protective applications (such as medical and construction environments) where fit testing is not routinely performed before each shift. N95 and related testing protocols effectively assess filtration efficiency for respirators that remain tightly fitted throughout activity, but since these protocols prescribe sealing the tested product ...

The 21st century is the Age of the Network. Operators and clients of critical infrastructure networks are now vulnerable to cascading failures that they could not have seen coming. “Cascading” failure events remain a vital unsolved challenge as critical infrastructure network operators and regulators struggle to define and operationalize resilience, and measurement of interdependent network re ...

Criticality Sciences, Inc. proposes to test the feasibility of a novel process embodied in NetResilience™ software, for estimating risk (expected loss) and resilience (e.g. recovery time and cost), and proposing mitigation (including during recovery) associated with cascading failure in an infrastructure network. The process will be applied to the interconnected water utility sector with a utili ...

High density wafer scale cryogenic probing solution for testing at 4.5K temperatures or below is needed for testing and characterization of devices and circuits employing superconducting electronic components (such as used for quantum processing, high speed classical processing, magnetic field sensors, etc.) as well as for testing of various particle and light detectors for astronomy, aerospace, d ...

Bridger Photonics, Inc. proposes to develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, ...

The EPA estimates that one out of every four Americans lives within three miles of a hazardous waste site. Recent advanced materials developments have driven increased use of In Situ Chemical Reduction (ISCR) remediation in the US and globally. Nanoscale Zero Valent Iron (NZVI) holds great potential for ISCR due to its low cost and high capacity for degrading halogenated compounds. However, two ma ...

High density wafer scale cryogenic probing solution for testing at 4.5K temperatures or below is needed for testing and characterization of devices and circuits employing superconducting electronic components (such as used for quantum processing, high speed classical processing, magnetic field sensors, etc.) as well as for testing of various particle and light detectors for astronomy, aerospace, d ...

Bridger Photonics, Inc. will develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, AFM, SE ...

The Environmental Protection Agency (EPA) estimates that one out of every four Americans lives within three miles of a hazardous waste site. Recent developments in advanced treatment materials has led to improvements driving increased use of In Situ Chemical Reduction (ISCR) at Superfund sites in the US and other contaminated zones around the world. Nanoscale Zero Valent Iron (NZVI) holds great po ...

There is no capability to rapidly assess the electrical properties of nanofiber films during manufacturing and prepregging process. Continuous monitoring of these films will guide the U.S. nanofiber manufacturing industry in optimizing and increasing the yield rate with proper process optimization and avoid any inconsistency in the process and the cost with associated waste material. To address th ...