List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Eddy current detection of cracks within the bore of installed Taper Lock fastener

    SBC: ALBANY INSTRUMENTS, INC.            Topic: N/A

    It is proposed to develop novel eddy current probes based on spin dependenttunneling (SDT) magnetoresistive (MR) sensors to enhance the probability ofdetection of cracks within the bore of installed Taper Lok fasteners. Preliminaryresults show that the use of shaped excitation coils, together with extremelysensitive SDT sensors properly positioned above the structure under inspection,provides a si ...

    SBIR Phase I 2001 Department of DefenseAir Force
  2. Multiple Frequency GaN FETs on Aluminum Nitride Substrates

    SBC: KYMA TECHNOLOGIES, INC.            Topic: N/A

    This program will develop high power, multiple frequency RF switches utilizing AlN substrates developed by Kyma Technologies, Inc. High-performance GaN-based devices, such as microwave transistors, have been demonstrated on sapphire and silicon carbidesubstrates; however, defects due to lattice and thermal expansion mismatch limit device performance. Dislocations significantly affect the performan ...

    SBIR Phase I 2001 Department of DefenseAir Force
  3. Ice Phobic Materials

    SBC: MICROPHASE COATINGS, INC.            Topic: N/A

    After four years of research, MicroPhase Coatings has invented a breakthrough silicone-silicate technology. Preliminary tests indicate that the coating is ice-phobic and meets requirements for aviation use. During Phase I we prove: (a) feasibility of usingthe coating to prevent ice buildup in B-2 engine inlets, and (b) compatibility with B-2 systems and Low Observable materials. During Phase I we ...

    SBIR Phase I 2001 Department of DefenseAir Force
  4. Development of an Evanescent Microwave Probe Scanner for Detecting and Assessing Corrosion Beneath Painted and/or Sealed Surfaces

    SBC: PROVIDENCE HOLDINGS            Topic: N/A

    This proposal outlines the development of a wireless Evanescent Microwave Probe (EMP) NDE technique that 1) can detect corrosion on aluminum surfaces at the 100 micron size scale, even below layers of paint, 2) can provide information on the integrity andstability of adhesive bonded patches, 3) can detect minute changes in the metal-patch bondline such as bondline separation and changes in the amb ...

    SBIR Phase I 2001 Department of DefenseAir Force
  5. Space Qualified GaN Communication Technology

    SBC: RF NITRO COMMUNICATIONS, INC.            Topic: N/A

    We propose to investigate wide band gap Gallium Nitride (GaN)semiconductors for K-band and Ka-Band power applications for high reliability spacecraft as well as commercial communications. High electron velocity in AlGaN/GaN heterostructure devicesindicate significant potential for fabrication of mm-wave HFET devices. RF output power of 10-12 W/mm with power-added efficiency approaching the ideal ...

    SBIR Phase I 2001 Department of DefenseAir Force
  6. Durability of Bonded Joints for Low and LO Repair of High Performance Composite Structures

    SBC: STRUCTURES TECHNOLOGY, INC.            Topic: N/A

    The objective of SBIR Phase I project has been successfully accomplished, beyond the proof-of-concept study. The achievements include: (1) developed an innovative M-integral method; (2) developed and validated 2-D environmentally induced degradationmodels; (3) implemented autoadaptive mesh technology in composite bonded joints, especially in the region of stress concentrations; (4) demonstrated th ...

    SBIR Phase I 2001 Department of DefenseAir Force
  7. Durability of Bonded Joints for Low and LO Repair of High Performance Composite Structures

    SBC: STRUCTURES TECHNOLOGY, INC.            Topic: N/A

    The objective of SBIR Phase I project has been successfully accomplished, beyond the proof-of-concept study. The achievements include: (1) developed an innovative M-integral method; (2) developed and validated 2-D environmentally induced degradationmodels; (3) implemented autoadaptive mesh technology in composite bonded joints, especially in the region of stress concentrations; (4) demonstrated th ...

    SBIR Phase II 2001 Department of DefenseAir Force
  8. Agent Supported Information Visualization System

    SBC: Viatec Research, Llc            Topic: N/A

    The innovation of this SBIR Phase II project is the development of a new and advanced, proprietary innovation called Dynamic Constrained Resource Efficiency Optimization (DCREO). DCREO consists of optimized security and adaptive presentation methods thatwhen combined, will expend 20X fewer resources, but yet still provide highly scalable fortress-like security mechanisms and high quality profile-t ...

    SBIR Phase I 2001 Department of DefenseAir Force
  9. Agent Supported Information Visualization System

    SBC: Viatec Research, Llc            Topic: N/A

    The innovation of this SBIR Phase II project is the development of a new and advanced, proprietary innovation called Dynamic Constrained Resource Efficiency Optimization (DCREO). DCREO consists of optimized security and adaptive presentation methods thatwhen combined, will expend 20X fewer resources, but yet still provide highly scalable fortress-like security mechanisms and high quality profile-t ...

    SBIR Phase II 2001 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government