List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Low Cost Carbon Fiber Composites for Lightweight Vehicle Parts

    SBC: MATERIAL INNOVATIONS, INCORPORATED            Topic: 27

    78845S The Department of Energy desires to increase fuel efficiency by reducing vehicle weight. Carbon fiber composites offer one promising way to do this, but difficulties in building economical, consistent, high quality preforms has limited the introduction of this material. This project will to adapt a well established pulp molding technology to produce carbon fiber preforms for lightweight ...

    SBIR Phase I 2005 Department of Energy
  2. A Robust Microfabricated Specimen Support with Integrated Capabilities for In-Situ Experimentation in the Transmission Electron Microscope

    SBC: PROTOCHIPS, INC.            Topic: 23

    79454S Despite advances in modern electron optics, which have permitted observation with unprecedented resolutions, most materials science research involves the quantification of static properties of materials. This is mostly due to limitations in modern day equipment and the time and cost associated with modifying existing microscopes. Consequently a need exists to extend the current ability t ...

    SBIR Phase I 2005 Department of Energy
  3. Reliable High Performance Carbon Nanotube and LaB6 Nanowire Field Emission Cathodes for STEM

    SBC: XINTEK, INC.            Topic: N/A

    79658B The reliable fabrication of high performance point electron sources is required for scanning transmission electron microscopy (STEM) systems with brightness greater than 109 Amp/cm2/steradian at an extraction voltage of 100 kV. Conventional point sources require a high vacuum for stable operation, and tip failure occurs by vacuum arcing and unstable emission due to atom migration. This p ...

    SBIR Phase I 2005 Department of Energy
  4. Geophysical Characterization of the Multiplew Phase Saturation of Rocks and Soils: Development of Methods and Software for CO2 Sequestration

    SBC: New England Research, Inc.            Topic: 09a

    79399S The world is becoming increasingly concerned about global warming and the emission of greenhouse gases such as CO2. Therefore, the capture and permanent sequestration of CO2 has become a major goal related to future energy development and use. This project will develop technology for assessing potential sequestration sites and for monitoring their ultimate storage integrity. The approac ...

    SBIR Phase I 2005 Department of Energy
  5. Reliable High Performance Carbon Nanotube and LaB6 Nanowire Field Emission Cathodes for STEM

    SBC: XINTEK, INC.            Topic: 23b

    79658B The reliable fabrication of high performance point electron sources is required for scanning transmission electron microscopy (STEM) systems with brightness greater than 109 Amp/cm2/steradian at an extraction voltage of 100 kV. Conventional point sources require a high vacuum for stable operation, and tip failure occurs by vacuum arcing and unstable emission due to atom migration. This p ...

    STTR Phase I 2005 Department of Energy
  6. 3 Dimensional Nano-Scale Reinforcement Architecture for Advanced Composite Structures

    SBC: 3TEX, Inc.            Topic: AF04T020

    Three-dimensional woven and braided fiber architectures provide important advantages to composites, including suppression of delamination, high damage tolerance, improved through-the-thickness properties, simplicity and cost-effectiveness of manufacturing complex composite structural components. However, in order to diversify applications and reach high volumes of utilization of these materials in ...

    STTR Phase II 2005 Department of DefenseAir Force
  7. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson's ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work introduces several nove ...

    SBIR Phase I 2005 Department of DefenseAir Force
  8. Material Surface Properties Modifications by Nonequilibrium Atmospheric Pressure Plasma Processing

    SBC: ATMOSPHERIC PLASMA SOLUTIONS            Topic: AF05T028

    The proposed research will develop a non-equilibrium plasma source for deposition of thin films on refractory materials at temperatures less then 600K. The developed source will also have the flexibility to surface treat thermally sensitive substrates without damage. Our existing non-equilibrium atmospheric plasma source will be optimized for depositing amorphous SiC and ZrO2 thermal barrier mat ...

    STTR Phase I 2005 Department of DefenseAir Force
  9. Knowledge-Based Multi-Diciplinary Optimization of Rocket Turbopump Design

    SBC: Concepts NREC, LLC            Topic: AF04199

    The design of turbomachinery components is a complex process requiring many steps and hundreds of minute decisions in an iterative process. The design proceeds from engine cycle performance and meanline design through 3D viscous flow calculations (CFD) and finite element structural analysis (FEA). Design studies may traverse this process many times, with routine tasks performed by engineers in a ...

    SBIR Phase II 2005 Department of DefenseAir Force
  10. A DNA Taggant Watermarking System

    SBC: EAGLE EYE, INC.            Topic: AF04124

    Taggants are small objects used to label things or people that need to be traced. Synthetic DNA Taggants are ideal for this, since very small amounts can be detected if the sequence is known, and can be disguised by natural DNA in the environment. Known protocols for DNA amplification (e.g. PCR) allow for very sensitive DNA detection, but suffer from disadvantages: the apparatus is not very portab ...

    SBIR Phase II 2005 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government