You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Cyber Craft System Scaling

    SBC: ADVENTIUM ENTERPRISES, LLC            Topic: OSD06IA5

    Many technical challenges will need to be surmounted to create practical cybercraft: assurance, control, rules of engagement, representation and discovery of the target environment, among others. However a serious challenge lurks behind all of these: scaling solutions to fleets of up to a million craft. New approaches are needed to deploy and control the craft at this scale. Failure to come to gr ...

    SBIR Phase I 2007 Department of DefenseAir Force
  2. Head orientation sensing system

    SBC: APPAREO SYSTEMS LLC            Topic: AF071020

    Appareo Systems, LLC, proposes to develop a functional prototype head-mounted position and orientation system (HPOS). The HPOS will be capable of operating in electromagnetic fields of up to 200 volts/meter and will provide at least one degree of accuracy and at least one degree of resolution at a 60 Hz update rate while providing 3 degree of freedom (DOF) information on head orientation, includi ...

    SBIR Phase I 2007 Department of DefenseAir Force
  3. Wax Substitutes for Melt Castable Explosive Fills

    SBC: Applied Colloids            Topic: AF06151

    Due to the phasing out of TNT usage in explosives due to safety and environmental concerns, insensitive explosives utilizing wax binders instead of TNT have gradually replaced TNT in bombs and other explosive shells. The wax material that has been the most utilized in this application has been carnauba wax, but due to its non-domestic production and its dependence on natural growth and harvest me ...

    SBIR Phase II 2007 Department of DefenseAir Force
  4. Quantitative In-Situ TEM Nanotribology Tester

    SBC: HYSITRON, INCORPORATED            Topic: 13

    Instead of being sent to flare which contributes to energy loses and greenhouse gas emissions, many refinery off-gases could be converted into valuable chemicals such as hydrogen. However, the refinery off-gases contain large concentrations of sulfur that must be removed to prevent the poisoning of the nickel-based steam reforming catalyst used in hydrogen production. Traditionally, deep desulfuri ...

    SBIR Phase I 2007 Department of Energy
  5. Quantitative In-Situ TEM Tensile Testing Apparatus

    SBC: HYSITRON, INCORPORATED            Topic: 13

    The Department of Energy supports collaborative research centers for electron beam microcharacterization of materials. Within these facilities, in situ transmission-electron-microscopy (TEM) tensile testing has been a powerful tool for revealing underlying physical mechanisms when materials are subjected to stress. However, all commercial in situ TEM tensile holders suffer from the absence of qu ...

    SBIR Phase I 2007 Department of Energy
  6. Computational Modeling of Two-Phase Cooling Systems for Future Generation Electronics

    SBC: INNOVATIVE RESEARCH, INC.            Topic: AF071262

    The overall objective of the proposed research is to develop a comprehensive, efficient, and well-validated computational method for the prediction of thermodynamic and hydrodynamic performance of various types of two-phase cooling systems for next generation electronics. In order to address the unique features of two-phase systems, the computational method will use a novel two-level approach that ...

    SBIR Phase I 2007 Department of DefenseAir Force
  7. Fatigue Resistant Wire for Airborne Applications

    SBC: MINNESOTA WIRE & CABLE CO            Topic: AF06132

    The gradual degradation of wiring systems in aircraft is a serious concern plaguing the Air Force's aging fleet. It has been observed that the majority of wire breakage problems occur within nine inches of the connector, terminal lug, or other junction. In many cases, the wiring was not properly relieved of strain near the junction points. Traditional wires are by nature inelastic under stress, ...

    SBIR Phase II 2007 Department of DefenseAir Force
  8. Magnetic Operational Environment Sensor

    SBC: NVE CORP. (FORMERLY NONVOLATILE ELECTRONICS, INC.            Topic: OSD05A05

    This Phase II SBIR program will design and manufacture an anti-tamper environmental sensor ideal for preventing “black-box” attacks. The sensor can detect changing environmental conditions from inside a protected cavity with and without applied power. The device is microelectronic compatible which allows it to be very small and extremely versatile. The “black box” can be many sizes and ...

    SBIR Phase II 2007 Department of DefenseAir Force
  9. Terminally Guided Robots and Robotic Applications in Confined Spaces

    SBC: PAR SYSTEMS            Topic: AF063C011

    This research will develop designs and new technologies needed for the first two critical system elements; (1) the robot system application and (2) drill end effector as defined in SBIR solicitation AF063C-011 entitled “Terminally Guided Robots and Robotic Application in Confined Spaces”. This work will extend the reach and accuracy to successfully drill inside highly contoured JSF/F-35 air i ...

    SBIR Phase I 2007 Department of DefenseAir Force
  10. Intelligently Vibrating Dewatering Machinery

    SBC: QUALITY RESEARCH, DEVELOPMENT & CONSULTING, INC.            Topic: 21

    Physical separation technologies use a tremendous amount of energy in the processing industries. In particular, vibrating machines are used for dewatering, screening, sizing, mixing, compacting, and conveying. Although vibrating machines are not the single most energy intensive step in a processing plant, they are often a major bottleneck in the process, and improvements would offer tremendous p ...

    SBIR Phase II 2007 Department of Energy
US Flag An Official Website of the United States Government