You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Head orientation sensing system

    SBC: APPAREO SYSTEMS LLC            Topic: AF071020

    Appareo Systems, LLC, proposes to develop a functional prototype head-mounted position and orientation system (HPOS). The HPOS will be capable of operating in electromagnetic fields of up to 200 volts/meter and will provide at least one degree of accuracy and at least one degree of resolution at a 60 Hz update rate while providing 3 degree of freedom (DOF) information on head orientation, includi ...

    SBIR Phase I 2007 Department of DefenseAir Force
  2. High Energy Density, Low-Cost, High Temperature Capacitors for Hybrid Vehicles

    SBC: Sbe Inc            Topic: 05

    Hybrid Electric Vehicles (HEVs) and plug-in Hybrid Vehicles (PHEVs) require advanced technology capacitors, which must have low cost and the ability to operate at 150oC. However, current 150oC film capacitor solutions are expensive and have lower energy density compared to materials that operate at lower temperatures. Polypropylene Film Capacitors represent a potentially cost effective solution ...

    SBIR Phase I 2007 Department of Energy
  3. A New High-Resolution Method for the Characterization of Heterogeneous Subsurface Environments: Providing Flow and Transport Parameters via the Integration of MultiScale HydroGeophysical Data

    SBC: NEW ENGLAND RESEARCH, INC.            Topic: 49

    Historically, remediation efforts at DOE contaminated sites have relied on numerical models to integrate laboratory and field characterization data, predict the fate and transport behavior of contaminant plumes, design remediation protocols to mitigate contaminant migration, and analyze data from field remediation results. Of particular concern is the effect of subsurface heterogeneities and thei ...

    SBIR Phase I 2007 Department of Energy
  4. Advanced Detection of Improvised Explosive Devices (IEDs)

    SBC: QUANTASPEC, INC.            Topic: AF06113

    Standoff detectors are required to detect IEDs. These detectectors are needed to save the lives of American soldiers. QuantaSpec has developed patent pending methods for long-range, sensitive, and selective standoff detection of explosives. These methods have already demonstrated sensitive remote detection of explosive vapors under previous efforts. QuantaSpec's multidisciplinary team will dem ...

    SBIR Phase II 2007 Department of DefenseAir Force
  5. Knowledge-Based Multi-Diciplinary Optimization of Rocket Turbopump Design

    SBC: Concepts NREC, LLC            Topic: AF04199

    The design of turbomachinery components is a complex process requiring many steps and hundreds of minute decisions in an iterative process. The design proceeds from engine cycle performance and meanline design through 3D viscous flow calculations (CFD) and finite element structural analysis (FEA). Design studies may traverse this process many times, with routine tasks performed by engineers in a ...

    SBIR Phase II 2005 Department of DefenseAir Force
  6. Nano Graphene Plate-Reinforced Polymer Composites

    SBC: NANOTEK INSTRUMENTS INC            Topic: 20

    79671S Attempts to produce Carbon Nano Tube(CNT) in large quantities have been fraught with overwhelming challenges due to poor yield, costly fabrication, and the need for the purifying processes required to make them useful in applications. This project will develop an alternative nanoscale carbon material with comparable properties that can be produced cost-effectively and in larger quantities ...

    SBIR Phase I 2005 Department of Energy
  7. Integrated Vehicle Health Management "Intelligent Engine" Turbopump Concept

    SBC: TURBO SOLUTIONS ENGINEERING LLC            Topic: AF05201

    Turbo Solutions Engineering LLC is providing this proposal for a Phase I Small Business Innovation Research Program. The technical objectives are to demonstrate the feasibility of the integration of real-time performance monitoring and diagnostics within a turbopump system, to provide operational status data, and to predict the remaining life of critical components. This Integrated Vehicle Healt ...

    SBIR Phase I 2005 Department of DefenseAir Force
  8. Geophysical Characterization of the Multiplew Phase Saturation of Rocks and Soils: Development of Methods and Software for CO2 Sequestration

    SBC: NEW ENGLAND RESEARCH, INC.            Topic: 09a

    79399S The world is becoming increasingly concerned about global warming and the emission of greenhouse gases such as CO2. Therefore, the capture and permanent sequestration of CO2 has become a major goal related to future energy development and use. This project will develop technology for assessing potential sequestration sites and for monitoring their ultimate storage integrity. The approac ...

    SBIR Phase I 2005 Department of Energy
  9. Through Screen Optical Head Tracker

    SBC: ASCENSION TECHNOLOGY CORPORATION            Topic: AF03059

    A critical military requirement exists for a fast, cost-effective, six-degrees-of-freedom (6DOF) technology that can track a pilot's helmet though rear-projection screens and is immune to distortion and interference from scatterers of magnetic/electrical energy. Building upon Phase I research that demonstrated feasibility of projecting light energy through graphics projection screens, Ascension T ...

    SBIR Phase II 2004 Department of DefenseAir Force
  10. Knowledge-Based Multi-Diciplinary Optimization of Rocket Turbopump Design

    SBC: Concepts NREC, LLC            Topic: AF04199

    The design of turbomachinery components is a complex process requiring many steps and hundreds of minute decisions in an iterative process. The design proceeds from meanline design through 3D viscous flow calculations (CFD) and finite element structural analysis (FEA). Design studies may traverse this design cycle many times, with routine tasks performed by engineers in a trial-and-error manner. ...

    SBIR Phase I 2004 Department of DefenseAir Force
US Flag An Official Website of the United States Government