You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
High Temperature (300 °C) Silicon Carbide (SiC)-Based Integrated Gate Drivers for Wide Bandgap Power Devices
SBC: Arkansas Power Electronics International, Inc. Topic: 08dSiC power semiconductors have the capability of greatly outperforming Si-based power devices. Smaller switching and on-state losses coupled with higher voltage blocking capability, and especially its high operating temperature make SiC the ideal semiconductor for high performance, high power density power modules. One major factor limiting the switching speed, and thus power loss of these devices, ...
SBIR Phase I 2013 Department of Energy -
PRISMS- Profile Resolving In-Situ Soil Moisture Sensor
SBC: TRANSCEND ENGINEERING AND TECHNOLOGY, LLC Topic: 20aMany contaminated DOE sites are located in arid regions where depth to groundwater is significant and/or contaminants were discharged into a vadose zone through which transport to the groundwater table is dominated by unsteady, unsaturated groundwater flow. The absence of an effective means to monitor vadose zone moisture content in profile has been a persistent impediment to developing and calibr ...
SBIR Phase I 2013 Department of Energy -
Variable Inlet Bypass for Efficient Wide Flow Range Turbocharger Compressor
SBC: Concepts NREC, LLC Topic: 06cIncreased use of Exhaust Gas Recirculation (EGR) combined with engine downsizing has pushed automotive turbocharger compressor operation towards and often beyond its efficient and stable operating boundaries. Much of the drive cycle is spent operating the compressor at low flow rates and low pressure ratios, near the compressor surge line, in an area which is usually of low efficiency. Our prelimi ...
SBIR Phase I 2013 Department of Energy -
Multicomponent Nanomanufactured Drop-in Lubricant Technology for Enhancing Engine Friction Reduction
SBC: NanoMech, Inc. Topic: 06hThe objective of this Phase I project is to demonstrate feasibility to design and develop novel nanomanufactured multicomponent lubricant additives applicable for engine, especially engineered as additive for enhancing engine economy with at least 3%. This economy will be enhanced through the power of nanosized multicomponent (multi-chemistry/macromolecular) lubricating agents launching into the i ...
SBIR Phase I 2013 Department of Energy -
Property/Composition Model for Phosphate Glasses Containing Hanford AZ102 LAW
SBC: MO-SCI Corp. Topic: 19gNuclear power is a key component in the strategy to meet the countrys energy goals and technologies are needed to improve the reliability of current reactors and disposing safely of nuclear wastes. Vitrification is considered the preferred process for nuclear waste disposal and the U.S. Department of Energy (DOE) currently approves only borosilicate glasses (BS) for that purpose. However, many nuc ...
STTR Phase I 2013 Department of Energy -
A Modular Miniature Satellite Laser Communications Transceiver
SBC: Space Photonics, Inc. Topic: AF01046ABSTRACT: The data transmission capacity required for fixed and tactical information networking continues to increase. Deploying traditional RF or microwave broadband direct line of sight (DLoS) links does not meet future warfighter needs. A key thrust for the Air Force (AF) is Assured Access Communications. This involves the pursuit of affordable low probability of intercept and detect (LPI/D ...
SBIR Phase II 2013 Department of DefenseAir Force -
Design and Development of a Low Cost, Manufacturable High Voltage Power Module for Energy Storage Systems
SBC: Arkansas Power Electronics International, Inc. Topic: 08bArkansas Power Electronics International, Inc. will design and develop a high performance, high voltage ( & gt; 15 kV) SiC MCPM that is low cost, manufacturable, reliable and reworkable. The target utility scale energy storage applications include power conversion systems for grid-tie, solar array, wind turbine, and vehicle-to-grid to aid in load leveling, frequency control, voltage fluctuations i ...
SBIR Phase II 2013 Department of Energy -
High Temperature Energy Harvesting Solution for Autonomous Wireless Sensor Networks in Aircraft Systems
SBC: Arkansas Power Electronics International, Inc. Topic: AF103201ABSTRACT: This Phase II SBIR will focus on the development of a high temperature (225°C) wirelessly powered, distributed wireless network for use in jet turbines. The network nodes will be capable of supporting sensors to monitor environmental variables or actuators for system controls. The nodes will be powered via a magnetically coupled RF energy transmission system. Resonant coupling syste ...
SBIR Phase II 2013 Department of DefenseAir Force -
Reconstruction Algorithms for High-Energy Computed Tomography Images of Rocket Motors
SBC: LICKENBROCK TECHNOLOGIES, INC. Topic: AF121187ABSTRACT: High Energy X-ray computed tomography (CT) is used to inspect the integrity of solid rocket motors. The purpose of this proposal is to improve the detection of defects when they are obscured due to physical limitations of CT. Lickenbrock has developed an advanced variant of the expectation-maximization (EM) algorithm, and other algorithms, for improving fidelity of CT. The EM algorit ...
SBIR Phase II 2013 Department of DefenseAir Force -
Multi-Module, Scalable, High Power Density, Radiation-Hardened Power Converter Interface Systems for Space Rated Li-Ion Battery in Satellite Applicati
SBC: Arkansas Power Electronics International, Inc. Topic: AF121056ABSTRACT: To significantly reduce procurement overhead and recognizing the mission strategic importance of developing modular power electronics for interfacing the battery to the spacecraft bus, APEI, Inc. is proposing to develop a novel multi-module, inherently scalable, high power density, radiation-hardened, intelligent battery module. The proposed development will focus on the following main ...
SBIR Phase II 2013 Department of DefenseAir Force