Award Data

Increasingly stringent exhaust emissions and fuel economy legislation is forcing automotive engine designers to: 1) demand increased pressure ratios from turbocharger compressors to ensure complete fuel combustion, 2) use Exhaust Gas Recirculation for emission reduction, and 3) reduce engine displacement while maintaining or even increasing output power to reduce fuel consumption. These three chan ...

The technology development for the supercritical CO2 (sCO2) power plant is well underway, and the first pilot plants are now under construction. The new pilot plants are sized for a 10 MW net power output; a good size to gain valuable data for larger utility scale power plants. This is also a very good size for the smaller, distributed power applications. The distributed power application is envis ...

A novel integrated inter-propellant seal and thrust bearing (IPS/TB) for rocket turbopump applications that uses the latest technology developments in seal coatings and additive manufacturing to advance the state-of-the-art. The IPS/TB has low propellant loss, requires little or no purge gas, and no continuous purge when the turbopump is not in operation. The thrust bearing portion can handle all ...

Appareo Systems, LLC, proposes to develop a functional prototype head-mounted position and orientation system (HPOS). The HPOS will be capable of operating in electromagnetic fields of up to 200 volts/meter and will provide at least one degree of accuracy and at least one degree of resolution at a 60 Hz update rate while providing 3 degree of freedom (DOF) information on head orientation, includi ...

Hybrid Electric Vehicles (HEVs) and plug-in Hybrid Vehicles (PHEVs) require advanced technology capacitors, which must have low cost and the ability to operate at 150oC. However, current 150oC film capacitor solutions are expensive and have lower energy density compared to materials that operate at lower temperatures. Polypropylene Film Capacitors represent a potentially cost effective solution ...

Historically, remediation efforts at DOE contaminated sites have relied on numerical models to integrate laboratory and field characterization data, predict the fate and transport behavior of contaminant plumes, design remediation protocols to mitigate contaminant migration, and analyze data from field remediation results. Of particular concern is the effect of subsurface heterogeneities and thei ...

Standoff detectors are required to detect IEDs. These detectectors are needed to save the lives of American soldiers. QuantaSpec has developed patent pending methods for long-range, sensitive, and selective standoff detection of explosives. These methods have already demonstrated sensitive remote detection of explosive vapors under previous efforts. QuantaSpec's multidisciplinary team will dem ...

The design of turbomachinery components is a complex process requiring many steps and hundreds of minute decisions in an iterative process. The design proceeds from engine cycle performance and meanline design through 3D viscous flow calculations (CFD) and finite element structural analysis (FEA). Design studies may traverse this process many times, with routine tasks performed by engineers in a ...

79671S Attempts to produce Carbon Nano Tube(CNT) in large quantities have been fraught with overwhelming challenges due to poor yield, costly fabrication, and the need for the purifying processes required to make them useful in applications. This project will develop an alternative nanoscale carbon material with comparable properties that can be produced cost-effectively and in larger quantities ...

Turbo Solutions Engineering LLC is providing this proposal for a Phase I Small Business Innovation Research Program. The technical objectives are to demonstrate the feasibility of the integration of real-time performance monitoring and diagnostics within a turbopump system, to provide operational status data, and to predict the remaining life of critical components. This Integrated Vehicle Healt ...