You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Production of New Durable, Transparent Conductive Coatings

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: AF071103

    Transparent conductive indium tin oxide (ITO) coatings are used on the canopies of certain USAF aircraft for a variety of electromagnetic functions. However, the aircraft canopies suffer from short service lifetimes and must be replaced often because today’s ITO coatings exhibit poor mechanical durability and scratch resistance as aircraft fly through rain and dust. The need for frequent replace ...

    SBIR Phase I 2007 Department of DefenseAir Force
  2. Low Temperature MgB2 Deposition for SRF

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: 27

    Most radio-frequency (RF) particle accelerators worldwide rely on normal conducting RF cavities to accelerate the particle beam. A few large research accelerators such as the Continuous Electron Beam Accelerator Facility (CEBAF) at Thomas Jefferson National Laboratory (JLAB) use superconducting radio frequency (SRF) accelerating cavities. SRF cavities consume less power than normal cavities to p ...

    SBIR Phase I 2007 Department of Energy
  3. Flexible environmental barrier technology for OLEDs

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: 12

    Protecting Organic Light Emitting Diodes (OLEDs) from moisture and oxygen remains the key technical challenge for fabricating flexible, solid-state lighting displays with acceptable service lifetimes. Although OLED-based displays on flexible PET polymer substrates have been demonstrated, they exhibit poor operating lifetimes due to atmospheric exposure. This project will develop a high-throughpu ...

    SBIR Phase I 2007 Department of Energy
  4. Enhanced Plasma Throughput for Superconducting Niobium Thin Film Deposition in RF Accelerator Cavities

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: 27

    Radio frequency (RF) cavities, key components in particle accelerators for fundamental high energy physics research, increasingly utilize superconducting technology to achieve higher accelerating field gradients. Traditionally, superconducting RF cavities are made of niobium, which, although expensive and difficult to fabricate, is able to be formed into large mechanical structures. Recently, in ...

    SBIR Phase I 2007 Department of Energy
  5. Protective conformal coatings for spacecraft polymers and paints

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: AF07T011

    Alameda Applied Sciences Corp proposes to further develop its non-line of sight, energetic coating system to deposit protective thin film coatings for polymers in the low earth orbit. Numerous satellites costing $25M to $1B reside in LEO and the lifetime time of the polymers used in these assets is limited by atomic oxygen (AO) erosion, UV/VUV damage and the negative effects of static charging. ...

    STTR Phase I 2007 Department of DefenseAir Force
  6. A SMART Lego system for Space Structures

    SBC: ACELLENT TECHNOLOGIES INC            Topic: AF06273

    Acellent Technologies proposes to develop a modular plug-and-play SMART Lego SHM system to obtain real-time information for panel identification and damage detection in satellite panels during storage, upon assembly and prior to launch. This will potentially enable development of low cost, plug-and-play (PnP) satellite structures to provide an Operational Responsive Space (ORS) capability for the ...

    SBIR Phase II 2007 Department of DefenseAir Force
  7. Production of New Durable, Transparent Conductive Coatings

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF071103

    Indium Tin Oxide (ITO) is currently used as a transparent electrically conductive coating on aircraft canopies to provide electromagnetic interference (EMI) shielding for electronic components. The problem with ITO is that it is relatively soft and scratches easily, requiring frequent replacement of the windscreen, leading to high maintenance costs and aircraft downtime. In addition, ITO is applie ...

    SBIR Phase I 2007 Department of DefenseAir Force
  8. Innovative Control Effectors for Common Aerovehicle (CAVs)

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF071266

    Acree Technologies Incorporated (ATI) has demonstrated the effectiveness of using an innovative Cathodic Arc Plasma Source (CAPS) to produce high-density plasma for control of supersonic air flow. ATI proposes to use its CAPS system for actuation on the Common Aero Vehicle (CAV). The purpose of this proposal is to demonstrate the effectiveness of using the CAPS to produce high-density plasma for a ...

    SBIR Phase I 2007 Department of DefenseAir Force
  9. A Cross-Disciplinary Environment for Computationally and Data Intensive Applications in the Geosciences

    SBC: 3dgeo Development Inc.            Topic: 43

    The exploration and production of oil and natural gas is one of the most computationally demanding endeavors, generating terabytes of data. To optimize the management of a producing oil field or to find new reserves, the E and P data must be readily available to a multidisciplinary asset management team. The data must be easy to access, and it must be effectively managed by a team of geologists, ...

    STTR Phase II 2007 Department of Energy
  10. Materials Degradation Analysis and Development to Enable Ultra Low Cost, Web-Processed White P-OLED for SSL

    SBC: Add-vision, Inc.            Topic: 12b

    In previous research, a specialty solid-state lighting (SSL) device had been developed. A doped Polymer Light-Emitting Diode (POLED) device structure is used, which enables devices to be printed with low capital equipment and operating costs. Although the devices are efficient, thin, flexible, and robust, additional performance improvements would broaden the range of applications to interior bui ...

    STTR Phase I 2007 Department of Energy
US Flag An Official Website of the United States Government