You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Films of Mo3Re to Improve the Performance of Existing Superconducting Radiofrequency Accelerator Cavities

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: 45a

    Improving the performance of existing superconducting radiofrequency cavities is one approach to improving the capabilities of existing accelerator facilities. By coating existing SRF cavities with Mo3Re, one could realize reduced coat of cryogenics and/or higher accelerating gradients. Alameda Applied Sciences Corp proposes to develop a thin film coating method to produce Mo3Re thin film superco ...

    SBIR Phase I 2010 Department of Energy
  2. Portable Active Damage Inspection (PADI) system for stress-corrosion cracks in aerospace structures

    SBC: ACELLENT TECHNOLOGIES INC            Topic: AF073109

    Safety, reliability, and life-cycle cost are of great concern to the aging aircraft manufacturing and maintenance industries. Current maintenance and inspection techniques for in-service structures are labor-intensive and time-consuming. Acellent Technologies proposes to develop an accurate, reliable integrated system for detection, prediction and mitigation of aging and manufacturing related ha ...

    SBIR Phase II 2010 Department of DefenseAir Force
  3. Development of Cascading Sensor Layer Network for Corrosion Monitoring in Multilayered Aircraft Components

    SBC: ACELLENT TECHNOLOGIES INC            Topic: AF083245

    Acellent Technologies, Inc. (Acellent) proposes to develop a reliable Cascading Sensor LAyer Network (CSLAN) based on Acellent’s SMART Layer® technology to detect and continuously monitor corrosion related damages. Multilayered metal structures in aircrafts are sometime subjected to very hostile environmental condition which are prone to develop stress corrosion cracks, pitting corrosion and ot ...

    SBIR Phase II 2010 Department of DefenseAir Force
  4. Passive, Wireless Sensors for Turbine Engine Airfoils

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF093124

    The purpose of this project is to demonstrate the feasibility of using a nanoparticle inkjet process to fabricate wireless temperature and pressure sensors on turbine engine airfoils for Integrated System Health Management. The approach will use a circuit constructed of passive components that will readout the temperature or pressure. The state of the sensor circuit will be determined by the reson ...

    SBIR Phase I 2010 Department of DefenseAir Force
  5. High Temperature Sensor Materials Optimization and Fabrication Methods

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF083079

    The purpose of this project is to demonstrate the feasibility of using an innovative, nanoparticle inkjet process for directly writing high temperature health monitoring sensors on turbine engine and thermal protection system components without the need for expensive sputtering, CVD, clean room or photolithography equipment. The inkjet process allows sophisticated sensor geometries and material co ...

    SBIR Phase II 2010 Department of DefenseAir Force
  6. Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs

    SBC: ACTA, LLC            Topic: AF083094

    A 24-month SBIR Phase II Project titled"Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs."The stated objective of this solicitation topic is to develop High-Fidelity Physics-Based (HFPB) Fast-Running Models (FRMs) for simulating the effects of small weapons in urban structures and materials. This proposal covers RC walls and slabs while an accompanying proposal co ...

    SBIR Phase II 2010 Department of DefenseAir Force
  7. Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs

    SBC: ACTA, LLC            Topic: AF08094

    A 24-month SBIR Phase II Project titled "Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs." The stated objective of this solicitation topic is to develop High-Fidelity Physics-Based (HFPB) Fast-Running Models (FRMs) for simulating the effects of small weapons in urban structures and materials. This proposal covers RC walls and slabs while an accompanying proposal ...

    SBIR Phase II 2010 Department of DefenseAir Force
  8. Weapons Effects FRMs for Reinforced Concrete Walls & Floor/Ceiling Slabs

    SBC: ACTA, LLC            Topic: AF083088

    A 24 month SBIR Phase II Project is proposed to develop weapons effects fast-running models (FRMs) for reinforced concrete walls and floor/ceiling slabs in hardened bunker-type structures. The objective is to develop High-Fidelity Physics-Based (HFPB) fast-running models (FRMs) for simulating the effects of air-delivered weapons on heavily reinforced concrete walls and floor/ceiling slabs. The h ...

    SBIR Phase II 2010 Department of DefenseAir Force
  9. Development of Superconducting Wollaston Prisms

    SBC: ADELPHI TECHNOLOGY INC            Topic: 19a

    Small Angle Neutron Scattering (SANS) has been an extremely productive materials science probe for several decades and is used extensively by researchers studying a wide range of subjects, including polymers, ceramics, metals and biological macromolecules and functions. However, it is limited to length scales from 1 to 100 nm and requires highly collimated and relatively monochromatic neutron beam ...

    STTR Phase I 2010 Department of Energy
  10. Improved Landing Gear Grinding/Finishing Methods on Hard Wear Resistant Surfaces

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC.            Topic: AF093203

    The Air Force is currently replacing chrome plating with High Velocity Oxygenated Fuel (HVOF) applied tungsten carbide-cobalt (WC-Co and WC-Co-Cr) coatings. These coatings require diamond wheels for finish grinding as well as aluminum oxide grinding wheels for base metal prep and Chrome plate grinding. The use of two types of wheels creates an undesirable equipment change out during the overhaul a ...

    SBIR Phase I 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government