List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Adaptive Materials for SHM

    SBC: Aura Technologies Llc            Topic: AF17AT018

    Bennett Advanced Research proposes to examine fundamental properties of adaptive materials for use with Additive Manufacturing technologies. The focus will be on developing a system for spacecraft Self Health Monitoring (SHM).

    STTR Phase I 2017 Department of DefenseAir Force
  2. High-Quality AlGaN Substrates for Optical and Electronic Applications

    SBC: KYMA TECHNOLOGIES, INC.            Topic: AF17AT024

    Kyma Technologies, the leading domestic supplier of crystalline III-N substrate materials, is teamed with leading AlGaN materials & device experts at Sandia National Laboratory, to develop high-quality AlGaN templates in Phase I and free-standing AlGaN substrates in Phase II. Understanding that the commercialization potential of AlGaN templates and substrates requires a cost-effective and diameter ...

    STTR Phase I 2017 Department of DefenseAir Force
  3. Fast Optical Limiters (OL) with Enhanced Dynamic Range

    SBC: ADVANCED PHOTON SCIENCES, LLC            Topic: AF17AT029

    Optical limiters (OL) protect sensitive optical and electronic devices from laser-induced damage. The existing passive OL utilize nonlinear optical materials transmitting low-intensity light, while blocking laser radiation with intensity exceeding certain limiting threshold (LT). The common problem with the existing OL is that, at any particular frequency range, the choice of suitable nonlinear ...

    STTR Phase I 2017 Department of DefenseAir Force
  4. Atmospheric Plasma Surface Activation of High Strength Steels for Electroplating

    SBC: ATMOSPHERIC PLASMA SOLUTIONS            Topic: AF171003

    The current surface activation process used to activate the surface of landing gear parts uses an aggressive grit blasting technique prior to electroplating. This technique is effective, but requires large amounts of blast media, requires a pre-cleaned surface and the process removes up to 0.1mils of substrate, much more than necessary. There is an urgent need for a process that can easily and eff ...

    SBIR Phase I 2017 Department of DefenseAir Force
  5. HVPE-Based Gallium Oxide Homoepitaxial Structures for RF and Power Switching Devices

    SBC: KYMA TECHNOLOGIES, INC.            Topic: AF171018

    Monoclinic -Ga2O3 has recently emerged as a promising material for ultrawide bandgap electronics for next-generation high voltage lateral and vertical power switching devices, thanks to its large bandgap (4.9eV), high critical breakdown field (8MV

    SBIR Phase I 2017 Department of DefenseAir Force
  6. Data Growth Within the Air Force Weather Enterprise

    SBC: Nextgen Federal Systems LLC            Topic: AF171035

    The data flow across the AFW enterprise is complex and spans multiple echelons (strategic, operational, and tactical). Weather data from various sensor platforms is ingested at different AFW locations. At the 557 WW, the weather data is collected, proce

    SBIR Phase I 2017 Department of DefenseAir Force
  7. 10kW Pulsed L-Band Solid State power Amplifier

    SBC: Vadum, Inc.            Topic: AF171113

    Vadum will develop a power-efficient, scalable, 10kW peak pulsed L-band solid state power amplifier (SSPA) based on Gallium Nitride (GaN) that will deliver superior performance for ground-based early warning air defense radar systems. The distributed PA

    SBIR Phase I 2017 Department of DefenseAir Force
  8. Inferring Mission Perils using Aggregate Cube Thresholds (IMPACT)

    SBC: Nextgen Federal Systems LLC            Topic: AF151041

    Historically, the inclusion of weather advice within ongoing planning has relied largely on a time consuming process of mental fusion of various information sources from disconnected systems. The application of weather advice on a near real-time ba

    SBIR Phase II 2017 Department of DefenseAir Force
  9. Visual Tire Pressure Indication

    SBC: Vadum, Inc.            Topic: AF151169

    Vadum will develop an innovative, rugged, reliable low-cost, visual aircraft tire pressure indicator system to enable quick, objective assessment at standoff. The wheel-mounted Visual Tire Pressure (VTiP) Stem is an electronic tire pressure sensor stem/cap solution containing a distinct and easy to understand numerical display. A single VTiP Stem offers full 0-400 PSI coverage and will deliver mea ...

    SBIR Phase II 2017 Department of DefenseAir Force
  10. Simplified Aero Model Development and Validation Environment

    SBC: Corvid Innovation LLC            Topic: AF161042

    Classical approaches to aircrew training are characterized by several shortcomings, including high costs and lack of realism. These issues have motivated the desire to advance the state-of-the-art in virtual aerial refueling training environments. Such an advance has the potential to provide a cost-effective way of introducing a more realistic environment in performing repetition training. A vi ...

    SBIR Phase II 2017 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government