Award Data

Conventional indoor environmental monitoring technologies are expensive, cumbersome to install and maintain, and do not provide the distributed granularity required to capture the necessary details for efficient energy management of commercial buildings. Developments in wireless sensor networks (WSN) provide substantial framework for monitoring and addressing indoor environments at scale. However ...

ABSTRACT: A need exists for a reliable, low cost radiation-hardened, non-volatile (NV) memory in aerospace and defense applications and in reliable, long-life, high-speed NV memory for terrestrial and commercial applications. Present offerings can accomplish the objective, but only at the expense of performance, power, size, and weight. Recent refocus on magnetic memory technologies, stemming f ...

ABSTRACT: A need exists for a reliable, low cost radiation-hardened digital memory in aerospace and defense applications and in long-life, high-speed memory for terrestrial and commercial applications. Present offerings can accomplish the objective, but only at the expense of performance, power, size, and weight with device redundancy and shielding. Recent focus on Graphene and its capabilities ...

ABSTRACT: Structural monitoring of the landing gear of fixed and rotary wing aircraft is of critical importance to the Air Force. These structures are subjected to repeated large dynamic loads that are highly variable in nature. In order to track these structures"fatigue over time, the magnitude and direction of load events and the number of fatigue cycles must be recorded. Smart, embedded mult ...

ABSTRACT: Cavitation which leads to head falloff and feed system instabilities are a constant source of problems for the low net positive suction head (NPSH) pumps that are needed for advanced liquid rocket engines. Head falloff limits the pumps capability to deliver propellant at the required pressure and cavitation induced instabilities are a significant source of structural failures in rocket ...

Clip-On Thermal Imagers (COTIs) have greatly increased the utility of night vision goggles (NVGs). Fusion of thermal and image intensified imagery has improved the warfighter's ability to quickly detect and then target or record potential targets and threats. Current generation COTIs are unity magnification systems optimized to work with unity magnification optical systems. Modifying the d ...

Embedded wireless sensors for corrosion monitoring of critical aircraft components are needed for improved condition based maintenance and future structural health monitoring (SHM) systems. The objective of this Phase I SBIR proposal is to design, develop, and test a corrosion measurement and data collection system that can utilize multiple types of corrosion sensors. A key design criterion is t ...

In the proposed work, we will develop a highly efficient and miniaturized vibration energy harvesting device suitable for use on drive system components of helicopters. The goal is to provide power to run a wireless corrosion hub and sensors (to be developed simultaneously in a separate program). The target power generating capability is 5mW under vibration conditions typical of steady state ...

Hybrid Electric Vehicles (HEVs) and plug-in Hybrid Vehicles (PHEVs) require advanced technology capacitors, which must have low cost and the ability to operate at 150oC. However, current 150oC film capacitor solutions are expensive and have lower energy density compared to materials that operate at lower temperatures. Polypropylene Film Capacitors represent a potentially cost effective solution ...

The objective of this proposal is to develop a reliable method to obtain reduced-order models for the simulation of large-scale seismic and acoustic signature propagation. These reduced-order models should be capable of reproducing results comparable to those obtained from a high-fidelity high-performance geologically complex numerical simulation code that normally requires a massively parallel c ...