List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Advanced Manufacturing of Gas Diffusion Layers with Highly Engineered Porosity

    SBC: GLACIGEN MATERIALS, INC.            Topic: 17b

    Proton exchange membrane fuel cells are exciting for many reasons and are one of the more advanced alternative energy technologies to realize early commercialization – fuel cell powered vehicles are on the road- The gas diffusion layer is a critical component in these fuel cell systems which not only controls water and reactant transport, but contributes to thermal management, and provide electr ...

    SBIR Phase I 2018 Department of Energy
  2. Permeability control for enhanced oil and gas recovery in unconventional reservoirs using advanced mineral precipitation technologies

    SBC: Montana Emergent Technologies, Inc.            Topic: 20b

    Unconventional oil and gas recovery has succeeded because of the ability to increase permeability in tight source rock via fracturing- While this has led to large increases in resource recovery, the ability to modify fracture apertures to allow finer control of permeability in these rocks has the potential to increase recovery efficiency- This SBIR project focuses on developing and commercializing ...

    SBIR Phase I 2018 Department of Energy
  3. Abrasion/Impact Resistant Coatings for Wind Turbine Blade Protection

    SBC: RESODYN CORPORATION            Topic: 15a

    In most wind turbine cases, in the absence of maintenance and repair the polymer composite blades’ service life can be significantly diminished compared to original estimates, and the overall turbine efficiency can severely suffer. Current repair products such as epoxy-based fillers and/or solvent-based paints have very limited abrasion-resistancecapabilities. In addition, wind protection tapes ...

    SBIR Phase II 2018 Department of Energy
  4. Low Tortuosity Electrodes Enabling High Specific Energy Li Ion Batteries

    SBC: GLACIGEN MATERIALS, INC.            Topic: 13a

    Despite all of the advantages that electric vehicles bring, better battery performance remains a requirement of widespread commercial adoption. Areas of specific interest include improved specific energy and energy density coupled with improved manufacturing processes which reduce costs and increase throughputs. This project aims to demonstrate a unique processing method, freeze tape casting, whic ...

    SBIR Phase I 2018 Department of Energy
  5. Abrasion/Impact Resistant Coatings for Wind Turbine Blade Protection

    SBC: RESODYN CORPORATION            Topic: 15a

    In most wind turbine cases, in the absence of maintenance and repair the polymer composite blades’ service life can be significantly diminished compared to original estimates, and the overall turbine efficiency can severely suffer. Current repair products such as epoxy-based fillers and/or solvent-based paints have very limited abrasion-resistance capabilities. In addition, wind protection tapes ...

    SBIR Phase I 2017 Department of Energy
  6. Hybridization of Freeze Casting with Additive Manufacturing for Simplified Production of High Performance SOFCs Topic and subtopic: 18b

    SBC: GLACIGEN MATERIALS, INC.            Topic: 18b

    Despite enormous advantages of high efficiency and fuel flexibility, solid oxide fuel cells (SOFCs) have seen limited development in mobile, including aerospace, application areas. On the technical front, this condition has been primarily driven by the low specific power density of SOFCs, typically less than 0.5 kW/kg. On the manufacturing front, limitations have been related to catalyst infiltrat ...

    STTR Phase I 2017 Department of Energy
  7. Developing Biomineralization Technology for Ensuring Wellbore Integrity

    SBC: Montana Emergent Technologies, Inc.            Topic: 17a

    Since drilling the earliest gas and oil wells, migration of hydrocarbons to the surface has challenged the oil and gas industry. With the recent onset of geologic CO2 sequestration activities, it has become even more important to develop well leakage mitigation strategies that can seal even microscopic apertures around injection, abandoned, and monitoring wells—especially in cases where traditio ...

    STTR Phase II 2017 Department of Energy
  8. Mixed-Phase Cloud Characterization Sensor

    SBC: Anasphere, Inc            Topic: 17a

    Quantitative measurements of water in all phases are important to the modeling and understanding of clouds. In-situ measurements within the clouds are particularly important to obtain, but the in-situ measurement instrumentation has been too large and heavy to deploy on any platforms except manned aircraft, leading to high experiment costs and reduced observation opportunities. A cloud characteriz ...

    SBIR Phase I 2016 Department of Energy
  9. A Compact, Broad-Band Hyperspectral SpectroRadiometer

    SBC: Resonon, Inc.            Topic: 20a

    Large-area, high-resolution hyperspectral imaging is needed to accurately understand the carbon-cycle between the atmosphere and terrestrial systems. To do this cost-effectively, small UAVs will be needed, for which there are currently no hyperspectral imagers that meet both the performance requirement of DOE and the size/weight requirements for deployment on small UAVs. How the Problem is Being ...

    SBIR Phase II 2016 Department of Energy
  10. Optical Waveguide Cross-Correlator for Attosecond Timing Synchronization

    SBC: ADVR, Inc            Topic: 32c

    This Phase II STTR will develop a precision balanced optical cross-correlator using engineered nonlinearoptical waveguides. The proposed device will be important for future advances at large scale accelerator facilities by providing a means to achieve long-term sub-femtosecond timing and synchronization of all of a facilitys optical and RF sub-systems over fiber optic links. Statement of how this ...

    STTR Phase II 2015 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government