Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics

    SBC: Orora Design Technologies, Inc.            Topic: DTRA07005

    Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  2. Bulk Composite Materials for Detection of Gamma Radiation

    SBC: Tetramer Technologies,L.L.C.            Topic: DTRA08005

    The objective of this proposal is to develop enabling technology for the production of bulk scintillating nanocomposites that have gamma radiation detection properties of single crystal NaI but with the manufacturability of plastic scintillators. These performance criteria may be met by developing nanoparticle polymer composites with ultra-high nanoparticle loadings. These ‘ultra-composites’ w ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  3. Portable Time of Flight Mass Spectrometer for Nuclear Forensics

    SBC: CREARE LLC            Topic: DTRA08004

    Analysis of nuclear material samples in the field has many advantages over laboratory analysis. Laboratory analyses can be slow, involve increased expense, lead to additional waste generation and disposal problems, and may introduce errors due to sample degradation or mishandling. In situ analysis mitigates all of these problems. The specific aim of this project is the development of a truly por ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  4. High Power IR/UV Laser for Accelerator Systems

    SBC: Aculight Corporation            Topic: 03d

    Electron accelerators allow researchers to advance energy and luminosity frontiers and expand our knowledge of nuclear physics and basic materials science. To achieve the best performance, specialized lasers are used to produce electrons for these accelerators. The lasers not only must be precise and reliable but also much more powerful than those that are currently available. This project will de ...

    SBIR Phase I 2008 Department of Energy
  5. High Efficiency Fiber Laser for Advanced Accelerator

    SBC: AdValue Photonics Inc            Topic: 49a

    The Department of Energy has identified a need for a single-polarization, mode-locked, high-power, 2-micron fiber laser for an advanced laser electron accelerator. The 2-micron laser wavelength would allow for both larger accelerator dimensions and the acceleration of more charge, compared to the 0.8 micron Ti:Sapphire laser. Another advantage of the 2-micron wavelength is the possibility of using ...

    SBIR Phase I 2008 Department of Energy
  6. IMPROVEMENT OF CARBON FOILS

    SBC: Arizona Carbon Foil Co Inc            Topic: N/A

    N/A

    SBIR Phase I 1983 Department of Energy
  7. DESIGN, MANUFACTURING, FEASIBILITY, CONSTRUCTION ADAPTABILITY AND THERMAL PROPERTIES TESTING.

    SBC: Columbia Building Materials            Topic: N/A

    CONCRETE MASONRY INTERIOR AND EXTERIOR WALLS THERMALLY COUPLED TO THE HOME INTERIOR IMPROVE PERSONAL COMFORT AND AT THE SAME TIME LOWER ENERGY USAGE DURING BOTH THE SUMMER AND WINTER SEASONS. EXTERIOR WALLS MUST BE INSULATED ON THE EXTERIOR SURFACE TO TAKE ADVANTAGE OF THE INTERIOR TEMPERATURE STABILIZATION EFFECT OF SUCH MASONRY THERMAL MASS IN WALLS. A CONCRETE BLOCK SYSTEM INCORPORATING OUTSIDE ...

    SBIR Phase I 1983 Department of Energy
  8. Diamond-Hardfaced WC/Co-Cr Nanocomposites for Extended Service Life of Pump Bearings in Geothermal Wells

    SBC: DIAMOND MATERIALS INC            Topic: 21c

    Renewable energy sources include electrical generators driven by steam from geothermal sources. Submersible pumps with extended service lives are required to improve the economics of today¿s geothermal systems. A major problem is corrosive wear experienced by the pump bearings, when the lubricating brine becomes contaminated with fine sand particles. Typically, the bearings are hardened with WC/C ...

    SBIR Phase I 2008 Department of Energy
  9. HydroMax- Overcoming the Challenges of Industrial Coal Gasification

    SBC: Diversified Energy Corporation            Topic: 18

    Volatile natural gas prices are negatively impacting the U.S. industrial sector, which consumes approximately 6.6 trillion cubic feet of natural gas annually. Over the last 24 months, natural gas prices have fluctuated between $5 and $12 per MMBtu, resulting in high and unpredictable fuel costs for the industrial sector. With abundant coal resources, an opportunity exists for the U.S. industrial ...

    SBIR Phase II 2008 Department of Energy
  10. MATHEMATICAL MODELING OF STRESS CORROSION CRACKING

    SBC: Electrochemical Systems, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1983 Department of Energy
US Flag An Official Website of the United States Government