Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics

    SBC: Orora Design Technologies, Inc.            Topic: DTRA07005

    Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  2. Bulk Composite Materials for Detection of Gamma Radiation

    SBC: Tetramer Technologies,L.L.C.            Topic: DTRA08005

    The objective of this proposal is to develop enabling technology for the production of bulk scintillating nanocomposites that have gamma radiation detection properties of single crystal NaI but with the manufacturability of plastic scintillators. These performance criteria may be met by developing nanoparticle polymer composites with ultra-high nanoparticle loadings. These ‘ultra-composites’ w ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  3. Portable Time of Flight Mass Spectrometer for Nuclear Forensics

    SBC: CREARE LLC            Topic: DTRA08004

    Analysis of nuclear material samples in the field has many advantages over laboratory analysis. Laboratory analyses can be slow, involve increased expense, lead to additional waste generation and disposal problems, and may introduce errors due to sample degradation or mishandling. In situ analysis mitigates all of these problems. The specific aim of this project is the development of a truly por ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  4. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: Environmental Abrasives, LLC            Topic: 07NCERA1

    All titanium is produced by the Kroll process, which is a batch process for the magnesium (Mg) reduction of titanium tetrachloride (TiCl4). Separate operations are required to produce the toxic and very corrosive TiCl4, which must be stored and transported. Magnesium also is produced separately in liquid form via the electrolysis of magnesium chloride (MgCl2), which requires storage and transport ...

    SBIR Phase I 2008 Environmental Protection Agency
  5. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: ATS-MER, LLC            Topic: N/A

    All titanium is produced by the Kroll process, which is a batch process for the magnesium (Mg) reduction of titanium tetrachloride (TiCl4). Separate operations are required to produce the toxic and very corrosive TiCl4, which must be stored and transported. Magnesium also is produced separately in liquid form via the electrolysis of magnesium chloride (MgCl2), which requires storage and transport ...

    SBIR Phase I 2008 Environmental Protection Agency
US Flag An Official Website of the United States Government