Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics

    SBC: Orora Design Technologies, Inc.            Topic: DTRA07005

    Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  2. Omni-Directional, Wind and Water Tolerant Inlet for the DFU

    SBC: ENERTECHNIX, INC.            Topic: CBD07116

    The current DFU inlet exhibits poor aerosol sampling efficiency at high wind speeds. This project will develop an improved inlet with very high sampling efficiency for 1 to 20 micron particles at wind speeds up to 30 mph independent of wind direction. The project is focused on the DFU, but our Aerodynamic Next Generation Inlet (ANGI) will be beneficial for any high volume aerosol sampling applicat ...

    SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense
  3. Bulk Composite Materials for Detection of Gamma Radiation

    SBC: Tetramer Technologies,L.L.C.            Topic: DTRA08005

    The objective of this proposal is to develop enabling technology for the production of bulk scintillating nanocomposites that have gamma radiation detection properties of single crystal NaI but with the manufacturability of plastic scintillators. These performance criteria may be met by developing nanoparticle polymer composites with ultra-high nanoparticle loadings. These ‘ultra-composites’ w ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  4. Portable Time of Flight Mass Spectrometer for Nuclear Forensics

    SBC: CREARE LLC            Topic: DTRA08004

    Analysis of nuclear material samples in the field has many advantages over laboratory analysis. Laboratory analyses can be slow, involve increased expense, lead to additional waste generation and disposal problems, and may introduce errors due to sample degradation or mishandling. In situ analysis mitigates all of these problems. The specific aim of this project is the development of a truly por ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  5. Automated Objective Speech Intelligibility Assessment System

    SBC: LI Creative Technologies Inc.            Topic: CBD07106

    Based on the success of our Phase I feasibility research, we propose to continue the project for the automated objective speech intelligibility assessment system. It consists of a pair of head and torso simulators placed at the same distance as typical face-to-face communication, a power amplifier, a laptop computer, a speech recognizer, and console software. The simulator has acoustic properties ...

    SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense
  6. Lightweight, Efficient Blower for Personal Air Ventilation System

    SBC: CREARE LLC            Topic: CBD07115

    A personal air ventilation system (PAVS) can dramatically improve the environment inside chemical/biological protective clothing, protecting the health and safety of soldiers and enabling peak physical/mental performance for long periods. However, existing air blowers that can produce the flow rate and pressure drop needed for a PAVS are too heavy, inefficient, and noisy for a man-portable system ...

    SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government