Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Affordable, Lightweight, Universal, Linear Motion

    SBC: NDI ENGINEERING COMPANY            Topic: N08158

    Develop an affordable, lightweight, low volume,power dense, linear motion system that can be universally applied to service a variety of shipboard operations that require a broad range of force and stroke.

    SBIR Phase I 2008 Department of DefenseNavy
  2. Next-Generation Marine Atmosphere Observing Instrumentation

    SBC: Basic Commerce and Industries Inc.            Topic: N08195

    The overall objective of this Phase I program is to develop the architecture for a satellite data uplink system for transmitting dropsonde measurement data from the sensor to a ground-based terminal without the use of a specialized receiver or direct line-of-sight radio links from the sonde to the host aircraft. This project is intended to complement the high-altitude, automatically ejected drops ...

    SBIR Phase I 2008 Department of DefenseNavy
  3. Gloves for diver thermal hand protection in cold water environments

    SBC: GERBING'S HEATED CLOTHING, INC.            Topic: N08189

    In this effort Gerbing's Heated Clothing will propose two or more glove candidates (prototypes) for further development. We intend to separately identify and embody the best glove design and heating system candidates based upon screening of all available technologies. Glove design focus will be to provide a lightweight glove with moderate insulating properties that provides maximum dexterity and t ...

    SBIR Phase I 2008 Department of DefenseNavy
  4. Lightweight, Compact, Heated Glove Insert for Diver Hand Protection

    SBC: CREARE LLC            Topic: N08189

    Navy divers require thermal protection for their hands in cold water to extend dive durations and to improve manual dexterity. Creare proposes to develop an innovative heated glove insert to improve hand dexterity. The proposed technology uses a very thin glove insert with a high distributed heating power to enhance thermal protection for the hands and fingers, keeping them at a comfortable temp ...

    SBIR Phase I 2008 Department of DefenseNavy
  5. Real-time Spectral Band Optimization for Unmanned Aerial Systems (UAS) Hyperspectral Camera

    SBC: DSPCon            Topic: N08155

    This effort develops a design for an integrated near real-time solution capable of determining optimal multi-spectral bands for target detection, storing complete mission data, and parsing resultant data and metadata for transmission of hyperspectral imaging results. This design, referred to as the “Optimized Hyperspectral Camera System” (OHCS), will leverage DSPCon’s new BFX architecture mi ...

    SBIR Phase I 2008 Department of DefenseNavy
  6. Eyesafer Fiber Laser Technology for Shipboard Defense

    SBC: nLight Photonics            Topic: N08159

    Power scaling of Er (Yb Free) fiber lasers is discussed. A 50W CW fiber laser at 1600nm is constructed with electronic pulsing of the seed source, using a MOPA configuration. A kW 1600nm single-mode fiber laser will be designed. A beam combining method to reach 100kW will be designed, for use in directed energy shipboard defense applications.

    SBIR Phase I 2008 Department of DefenseNavy
  7. Eyesafer Fiber Laser Technology for Shipboard Defense

    SBC: N.P. PHOTONICS, INC.            Topic: N08159

    This proposal is for the development of a new all fiber single mode Tm3+-doped two micron fiber laser with output power of 5 Kilowatts. This new fiber laser is retina safe, reducing the possibility of eye damage to the operators due to scattering and reflections. The laser wavelength is located in one of atmospheric transmission windows as well. This type of fiber laser can be used in the Navy’ ...

    SBIR Phase I 2008 Department of DefenseNavy
  8. High Resolution RF-Photonic Beam-Forming Modules for Electronically Scanned Arrays

    SBC: Eospace Inc.            Topic: N08167

    EOSPACE will study the feasibility of using two different RF-Photonics modules for performing beam-forming operations in Electronically Scanned Array (ESA) systems. The first architecture utilizes unique High-Resolution Hybrid True Time Delay modules. A second complimentary architecture will use an innovative High-Precision Common Phase Control module. Each of these approaches offers greater perfo ...

    SBIR Phase I 2008 Department of DefenseNavy
  9. Automated System for Digital Measurements of Ear Canal Geometry

    SBC: CREARE LLC            Topic: N08153

    The widespread incidence of hearing loss in veterans throughout the Armed Forces, coupled with the lack of compliance with earplug usage guidelines for active personnel, necessitates a new approach to hearing protection. When properly fitted and worn, custom earplugs have the potential to provide consistent, reliable hearing protection. Creare proposes to develop a new technological approach tha ...

    SBIR Phase I 2008 Department of DefenseNavy
  10. Rugged and Durable Fiber Optic Replacement

    SBC: HYBRID GLASS TECHNOLOGIES, INC.            Topic: N08115

    Hybrid Glass Technologies, Inc. (HGT) proposes to design and develop a rugged and durable drop-in fiber replacement that would provide a versatile platform for a number of photonic network-centric military avionic network applications. The key improvement over the currently used technology will be provided by the fiber coating material called hybrid glass that meets the military adverse environmen ...

    SBIR Phase I 2008 Department of DefenseNavy
US Flag An Official Website of the United States Government