You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Scalable Single- and Multi-"Boule"Bulk GaN Substrate HVPE Production Tool
SBC: STRUCTURED MATERIALS INDUSTRIES, INC. Topic: DTRA122001GaN-based devices are currently grown on foreign substrates such as SiC and Al2O3, due to the lack of high quality GaN substrates. It is well known that the use of foreign substrates limits device performance due to a high dislocation density in the GaN film. Structured Materials Industries, Inc. (SMI) has developed a hybrid HVPE approach to grow high quality GaN device films. In this SBIR proj ...
SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency -
A Portable Laser Device for Remote Filler Identification
SBC: AAC International Topic: DTRA122012The proposed SBIR research (Phase I and II) is devoted to developing a laser-based acousto-ultrasonic system for inspection of sealed containers. The system represents a promising technology for improving safety management in anti-terrorism and treaty compliance operations. The system will use a pulsed laser to excite the container and a laser Doppler vibrometer for long stand-off vibratory (ult ...
SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency -
The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics
SBC: Orora Design Technologies, Inc. Topic: DTRA07005Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (
SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency -
Bulk Composite Materials for Detection of Gamma Radiation
SBC: TETRAMER TECHNOLOGIES LLC Topic: DTRA08005The objective of this proposal is to develop enabling technology for the production of bulk scintillating nanocomposites that have gamma radiation detection properties of single crystal NaI but with the manufacturability of plastic scintillators. These performance criteria may be met by developing nanoparticle polymer composites with ultra-high nanoparticle loadings. These ‘ultra-composites’ w ...
SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency -
Portable Time of Flight Mass Spectrometer for Nuclear Forensics
SBC: CREARE LLC Topic: DTRA08004Analysis of nuclear material samples in the field has many advantages over laboratory analysis. Laboratory analyses can be slow, involve increased expense, lead to additional waste generation and disposal problems, and may introduce errors due to sample degradation or mishandling. In situ analysis mitigates all of these problems. The specific aim of this project is the development of a truly por ...
SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency -
Ballistic Missile System Innovative Radiation Hardened/Tolerant Electronics Products
SBC: Orora Design Technologies, Inc. Topic: MDA03056Orora Design Technologies, teaming up ATK Mission Research and Boeing Solid-State Electronics, with the support from Oregon State University and Vanderbilt University, proposes to develop innovative mixed-mode and mixed-level simulation capacities for combined simulation of radiation and electrical performance to speed up simulation in radiation hard designs of VLSI circuits. The ultimate goal is ...
SBIR Phase II 2006 Department of DefenseDefense Threat Reduction Agency -
Chemical and Biological Agent Deny
SBC: Sensintel Inc. Topic: DTRA06012ACR proposes the development of novel composite systems for air burst munitions capable of releasing high temperature over an extended area. Investigation will use Fibrous Monolith (FM) processing and a cost-efficient, innovative reactive composite system to form an airburst system that will generate an expanding thermal cloud. The proposed FM system would have a cellular structure, consisting o ...
SBIR Phase I 2006 Department of DefenseDefense Threat Reduction Agency -
Standoff Detection of IED Laden Vehicles to Include Next Generation WMD Dispersal Device Defeat
SBC: Dymas Research Incorporated Topic: DTRA06008Standoff detection of improvised explosive devices continues to be one of the most critical tasks that security specialists must confront in a wide variety of applications, both military and civilian. There have been several approaches for standoff explosive detection. Each of them utilizes a different fundamental property of explosives to improve the sensitivity of detection. In this SBIR program ...
SBIR Phase I 2006 Department of DefenseDefense Threat Reduction Agency -
Hybrid Reactive Materials for Thermobaric Weapons
SBC: REACTIVE METALS, INC. Topic: DTRA06010It is proposed to develop hybrid powders containing highly reactive filler coated by or embedded into a matrix of readily boiling, combustible binder. The binder materials, such as paraffin wax or red phosphorus are expected to ignite and burn within the expanding fireball while the reactive filler remains at the relatively low temperature at which the binder boils, and thus remains protected fro ...
SBIR Phase I 2006 Department of DefenseDefense Threat Reduction Agency