You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Green Monopropellant Thruster TRL Maturation Scaling Effort
SBC: CREARE LLC Topic: MDA12T008Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...
STTR Phase II 2018 Department of DefenseMissile Defense Agency -
Integrated Computational Material Engineering Technologies for Additive Manufacturing
SBC: QUESTEK INNOVATIONS LLC Topic: T12Additive manufacturing (AM) is a novel process of fabricating components in a layer-by-layer method under the control of computer-aided design (CAD) information rather than by the traditional casting methods. The transition of AM technology from production of prototypes to production of critical parts is hindered by a lack of confidence in the quality of the part. In the push to commercialize the ...
STTR Phase II 2018 National Aeronautics and Space Administration -
Volume Sensor for Flexible Fluid Reservoirs in Microgravity
SBC: CREARE LLC Topic: T6The Advanced Space Suit carries consumable cooling water maintained at ambient pressure within a soft-walled, flexible reservoir. To ensure uninterrupted thermal control it is critical to monitor the volume of water remaining, but no known sensor is suitable for this task. Existing measurement techniques are unacceptably sensitive to the motion and varying geometry of the reservoir in microgravity ...
STTR Phase II 2018 National Aeronautics and Space Administration -
Metal Advanced Manufacturing Bot-Assisted Assembly (MAMBA) Process
SBC: TETHERS UNLIMITED, INC. Topic: H7Tethers Unlimited, Inc. (TUI) proposes to develop the Metal Advanced Manufacturing Bot-Assisted Assembly (MAMBA) Process, a robotically managed metal press and milling system used to create precision parts on orbit. This manufacturing process provides an alternative to 3D printing metals in space, which is difficult due to space environment, feedstock safety concerns, and print quality issues. I ...
SBIR Phase II 2018 National Aeronautics and Space Administration -
Type-II Superlattice Based Low Dark Current Short-Wavelength Infrared Photodetectors With Optical Response From 0.4 to 2.5um
SBC: NOUR LLC Topic: S1In recent years, Type-II superlattices have experienced significant development. However, the full potential of Type-II superlattice has not been fully explored and alternate superlattice architectures hold great promise. Despite demonstration of SWIR photodetectors based on this material system, there has been no report about Type-II superlattice-based photodetectors that have been sensitive to v ...
SBIR Phase II 2018 National Aeronautics and Space Administration -
Low Cost Cryocooler Control Electronics for Small Space Platforms
SBC: CREARE LLC Topic: S1Many of NASA’s future space science missions will utilize small spacecraft, and many of these missions will require cryocoolers for cooling detectors, sensors, shields, and telescopes. For Class C and D missions, the cryocooler technical requirements for performance, size, and mass, coupled with the programmatic requirements for minimal cost and development time, are extremely challenging. Fli ...
SBIR Phase II 2018 National Aeronautics and Space Administration -
CUA OpenMP Nonlinear Optimization Tool
SBC: CU AEROSPACE L.L.C. Topic: H9Nonlinear programming (NLP) allows for the solution of complex engineering problems, however, none of the currently available solvers fully capitalize on parallel computing. Many NASA trajectory design packages (OTIS, EMTG, MALTO) have already had their own code streamlined, and it is now the serial execution of existing NLP solvers that represents the largest bottleneck. It is the goal of this Ph ...
SBIR Phase II 2018 National Aeronautics and Space Administration -
A Two-Phase Pumped Loop Evaporator with Adaptive Flow Distribution for Large Area Cooling
SBC: CREARE LLC Topic: S3NASA’s future remote sensing science missions require advanced thermal management technologies to maintain multiple instruments at very stable temperatures and utilize waste heat to keep other critical subsystems above minimum operational temperatures. Two-phase pumped loops are an ideal solution for these applications. A critical need for these pumped loops is a microgravity-compatible evaporat ...
SBIR Phase II 2018 National Aeronautics and Space Administration -
Precision Eddy Current Sensor for Nondestructive Evaluation of Spacecraft Structures
SBC: EAGLE HARBOR TECHNOLOGIES, INC. Topic: H13In order to mitigate risk to equipment and crew, NASA needs nondestructive evaluation (NDE) techniques and sensors that are capable of detecting holes, pits, cracks, and corrosion of structures that are not visually accessible. The Independent Assessment of Instrument for ISS On-Orbit NDE highlights the challenges and importance of performing NDE of the international space station (ISS) pressure w ...
SBIR Phase II 2018 National Aeronautics and Space Administration -
Reversible Adhesion Concept for In-Space Assembly
SBC: ATSP Innovations, Inc. Topic: Z4ATSP Innovations will develop a reversible adhesion concept for use in reconfigurable space frame construction. This reversible adhesion concept is based on application of aromatic thermosetting copolyester (ATSP) to selected adhesive contact points. By virtue of a class of reversible solid-state chemical reactions (called interchain transesterification reactions - ITR) intrinsic to the polymer, A ...
SBIR Phase II 2018 National Aeronautics and Space Administration