List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Test Article Printing with Laser Additive Manufacturing (TAP-LAM) for Threat Surrogate Target Production

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: MDA17T001

    Optonicus proposes development of the TAP-LAM (Test Article Printing with Laser Additive Manufacturing for Threat Surrogate Target Production) powder bed fusion and directed energy depositions systems. The TAP-LAM metal additive manufacturing system will advance strategic missile defense system testing capabilities by improving 3D printing methods to rapidly produce large-scale threat surrogate ta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  2. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  3. Control Electronics for Space-Qualified Cryogenic Coolers

    SBC: CREARE LLC            Topic: MDA17T003

    Future MDA space missions will utilize small spacecraft with correspondingly small, advanced sensor systems.Cooling of these sensors is required to decrease detector noise and increase detector sensitivity by maintaining the detector at a reduced operating temperature.The cooling system comprises a mechanical cryocooler and its control electronics, both of which are critical technologies to enable ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  4. Lightweight Magnesium Components of a Missile Body

    SBC: Terves Inc.            Topic: MDA17T004

    Magnesium alloys have 35% lower density compared to aluminum, with improved temperature stability compared to high strength aluminum.They can also be fabricated with minimum gauge thicknesses considerably thinner than fiber composites, and are weldable, with much higher impact resistance.Traditional magnesium alloys, however, have had lower strengths than more developed aluminum alloys.Powder meta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  5. Proactive Risk Monitoring Using Predictive Analytics

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: MDA16T002

    Presently the missile defense systems are using a reactive and program-centric framework for assessing industrial base risk. The Phase I effort focused on developing a wide and deep network algorithm using Industrial Product-Support Vendor (IPV) Gen II program for predicting the probability of failure. The proposed Phase II effort leverages the Phase I work and will focus on three main goals:(1) I ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  6. Green Monopropellant Thruster TRL Maturation Scaling Effort

    SBC: CREARE LLC            Topic: MDA12T008

    Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  7. High Performance MEMS Inertial Measurement Unit for Missile Systems

    SBC: Spectral Energies, LLC            Topic: MDA17015

    The proposed project aims to pursue an innovative approach of utilizing deep learning algorithms to improve the performance of state-of-the-art MEMS Inertial Measurement Units (IMUs) to push their performance to fullest extent possible as replacements for existing Fiber Optic Gyroscopes (FOG) systems for navigation and guidance in future missile system avionics including Sounding Rockets. During P ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  8. Conformal Electronics Coating Materials and Processes

    SBC: Cornerstone Research Group, Incorporated            Topic: MDA06051

    Cornerstone Research Group Inc. (CRG) proposes to provide a complete conformal coating solution to the Missile Defense Agency (MDA). CRG developed a conformal coating under a previous anti-tamper SBIR program. The manufacturing process and proprietary mixing procedures have been developed for this baseline formulation, and independent laboratory testing has produced good results. This formulation ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  9. Volume Signature Mapping System

    SBC: Cornerstone Research Group, Incorporated            Topic: MDA07043

    Significant advantages occur in cost reduction, technology maturity, and ease of implementation when using commercial-off-the-shelf components and systems boards in critical military applications. Because COTS components are well documented reverse engineering their contents is very straight forward. The first layer of protection for critical technology is the physical volume that encloses the sys ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  10. Sensor Data Fusion

    SBC: Edaptive Computing, Inc.            Topic: MDA07029

    The task of identifying and successfully destroying a missile threat requires a vast network of RADARs, sensors, software, and other resources working together flawlessly. Information from these systems must be fused to provide with their operators an accurate and complete picture of the battlespace. With up-to-date, fused information on threats and targets, operators can make quick, informed de ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government