List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Test Article Printing with Laser Additive Manufacturing (TAP-LAM) for Threat Surrogate Target Production

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: MDA17T001

    Optonicus proposes development of the TAP-LAM (Test Article Printing with Laser Additive Manufacturing for Threat Surrogate Target Production) powder bed fusion and directed energy depositions systems. The TAP-LAM metal additive manufacturing system will advance strategic missile defense system testing capabilities by improving 3D printing methods to rapidly produce large-scale threat surrogate ta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  2. Additive Manufacturing of Metallic Materials for High Strain Rate Applications

    SBC: MRL MATERIALS RESOURCES LLC            Topic: MDA17T001

    Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  3. Control Electronics for Space-Qualified Cryogenic Coolers

    SBC: CREARE LLC            Topic: MDA17T003

    Future MDA space missions will utilize small spacecraft with correspondingly small, advanced sensor systems.Cooling of these sensors is required to decrease detector noise and increase detector sensitivity by maintaining the detector at a reduced operating temperature.The cooling system comprises a mechanical cryocooler and its control electronics, both of which are critical technologies to enable ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  4. Lightweight Magnesium Components of a Missile Body

    SBC: Terves Inc.            Topic: MDA17T004

    Magnesium alloys have 35% lower density compared to aluminum, with improved temperature stability compared to high strength aluminum.They can also be fabricated with minimum gauge thicknesses considerably thinner than fiber composites, and are weldable, with much higher impact resistance.Traditional magnesium alloys, however, have had lower strengths than more developed aluminum alloys.Powder meta ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  5. Proactive Risk Monitoring Using Predictive Analytics

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: MDA16T002

    Presently the missile defense systems are using a reactive and program-centric framework for assessing industrial base risk. The Phase I effort focused on developing a wide and deep network algorithm using Industrial Product-Support Vendor (IPV) Gen II program for predicting the probability of failure. The proposed Phase II effort leverages the Phase I work and will focus on three main goals:(1) I ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  6. Green Monopropellant Thruster TRL Maturation Scaling Effort

    SBC: CREARE LLC            Topic: MDA12T008

    Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  7. High Performance MEMS Inertial Measurement Unit for Missile Systems

    SBC: Spectral Energies, LLC            Topic: MDA17015

    The proposed project aims to pursue an innovative approach of utilizing deep learning algorithms to improve the performance of state-of-the-art MEMS Inertial Measurement Units (IMUs) to push their performance to fullest extent possible as replacements for existing Fiber Optic Gyroscopes (FOG) systems for navigation and guidance in future missile system avionics including Sounding Rockets. During P ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  8. Techniques for Real-time Hypervelocity Projectile fly-out Generation and Optimization

    SBC: Vadum, Inc.            Topic: MDA18002

    Vadum will develop an algorithm to generate and optimize Hypervelocity Projectile (HVP) trajectories as both an analysis and tactical battle management tool.The Optimal Advanced HVP Trajectory System (OATHS) will respond to threat track updates as they are received from upstream processing elements and will be capable of optimizing trajectories for a variety of different threat types with differen ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  9. Lightweight Fiber Reinforced Aluminum Components for Missile Structures

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: MDA18006

    The Missile Defense Agency is searching for innovative technologies to implement in future interceptor missiles and kill vehicles that will produce weight savings within the systems. To answer this need, Touchstone Research Laboratory proposes to develop fiber reinforced aluminum (FRA) metal matrix composite components to replace those that were originally made from Ti-6-4. The FRA is able to reta ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  10. Radar Cross Section Testing for Modeling and Simulations

    SBC: Corvid Technologies LLC            Topic: MDA17009

    Corvid Technologies presents the following proposal to the Missile Defense Agency (MDA) SBIR solicitation MDA17-009 entitled Radar Cross Section (RCS) Testing for Modeling and Simulations. Here, we propose the development of algorithms and processes to significantly reduce the burden and cost associated with RCS measurements conducted in support of MDA and other Department of Defense customers. Th ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government