Award Data

The proposed project aims to pursue an innovative approach of utilizing deep learning algorithms to improve the performance of state-of-the-art MEMS Inertial Measurement Units (IMUs) to push their performance to fullest extent possible as replacements for existing Fiber Optic Gyroscopes (FOG) systems for navigation and guidance in future missile system avionics including Sounding Rockets. During P ...

Today"s Ballistic Missile Defense networks consist of many different types of sensors and platforms, and given the expanded focus of MDA on theater and regional missile defense where multiple"raids"can be launched from different sites toward numerous targets, it is crucial that they can be dynamically tasked and deployed effectively in real-time to realize their full potential in achieving overall ...

We propose to develop a large-format 1Kx1K longwave infrared focal plane array (FPA) from Type-II InAs/(In)GaSb strained layer superlattice (SLS) photodiodes. In Phase I, we will develop small pixels with the goals of ~ 10 micron cutoff wavelength, quantum efficiency>60%, and dark current density

We propose to bandgap engineer the InAs/GaSb/AlSb material system to realize a dualband focal plane array (FPA) made up of stacked multi-barrier Type-II strained layer superlattice (SLS) photodiodes. Two longwave infrared spectral bands will be imaged in alternate frames by using a readout multiplexer that flips the voltage bias across the FPA from frame to frame. In Phase I, we will develop and ...

The objective of this program is to develop and produce a prototype SM-3, Block IIB nosecone that can achieve all of the performance requirements specified for the IIB interceptor, but at a considerably lower cost and weight than has been achieved previously with SM-3 nosecones. This is achievable with technologies developed at Mentis Sciences, Inc., and is being applied to a number of other inte ...

Thermal batteries are a power source for most MDA weapons systems. Some of these systems have severe constraints on weight and size, and for this reason, advanced thermal batteries are needed that can provide greater power in smaller and lighter packages. The key components of conventional thermal battery cells are made by hydraulically pressing powders. Such components must be greater than a m ...

This Phase I Small Business Innovative Research Program will develop and demonstrate the technology to produce large-scale, high temperature, lightweight composite missile structures for transition to a fielded weapons system where weight minimization and resistance to high temperature exposure is critical. Performance Polymer Solutions Inc."s composite system has the ability to survive in extrem ...

At hypersonic flow conditions, the flow field around reentry vehicles is ionized, resulting in electro-optical emissions, detectable radar cross-sections, and attenuation of signals transmitted through the plasma. Ablative heat shields may further increase the levels of electrons in the plasma around the hardbody and in the wake. We propose to extend an existing high-fidelity computational fluid d ...

We propose to define a dynamically reconfigurable photonics-based system to efficiently collect, down-convert, distribute, and selectively combine the return signals from multiple array elements to a set of digital processors. Electronic signals from the array elements will modulate optical carrier signals. With an appropriate choice of optical carrier signal and photonic architecture, the signals ...

Recent broadband analog photonic link performance improvements have renewed the interest and activity in developing microwave photonics for broadband radio frequency (RF) signal transmission and signal processing. Increased bandwidths and reduced fiber optic link insertion loss/noise figure accompanied by increased dynamic range have created real insertion opportunities of advanced fiber optic sig ...