Award Data

Presently the missile defense systems are using a reactive and program-centric framework for assessing industrial base risk. The Phase I effort focused on developing a wide and deep network algorithm using Industrial Product-Support Vendor (IPV) Gen II program for predicting the probability of failure. The proposed Phase II effort leverages the Phase I work and will focus on three main goals:(1) I ...

Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...

The expansion in the Missile Defense Agency"s mission to include emphasis on theater and regional missile defense necessitates the development of innovative concepts and techniques for employment planning and real time tasking of a variety of distributed sensor resources. Needed are algorithms in a number of closely coupled areas including: fusion of information from disparate and possibly hetero ...

Diode-Pumped Alkali Laser Systems (DPALS) require a uniform, steady, flowing mixture of helium and rubidium vapor at elevated pressure and temperature. Significant challenges exist because rubidium is a very reactive material. In response, our team is developing a contamination-free, all-metal, hermetic, circulation system based on gas-bearing turbomachines. Specific benefits include low mass, ...

Mentis and SDC are developing materials suitable for operating in extreme environments, such as those experienced by exit nozzles in Throttleable Divert and Attitude Control Systems (TDCAS), or as thermal protection in ballistic missiles and payload delivery systems. A material characterization effort is required to establish accurate material properties at storage and operational conditions. Ap ...

Mentis Sciences (Mentis) is providing Low Rate Initial Production (LRIP) line to produce a Radome Assembly (RA). Mentis focus is to assure all elements of the production process approaches a Manufacturing Readiness Level (MRL) 8. This effort requires developing processes and Design of Experiments (DOE) for controlling each element of production to assure quality and cost goals for meeting LRIP. ...

We propose to combine QmagiQ's strained layer superlattice (SLS) sensor technology with MIT Lincoln Laboratory's novel digital pixel readout integrated circuit (DROIC) to realize an advanced longwave infrared digital focal plane array (DFPA) with high quantum efficiency, dynamic range, and operating temperature. In Phase I, we developed the basic SLS DFPA and demonstrated its extraordina ...

Proper design of Diode-Pumped Alkali Laser Systems (DPALS) is challenging because many interrelated processes impact their performance and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The resulting product will be a user-friendly, high-fi ...

Missile flight test telemetry has been performed at S band (2200 2395 MHz) since the 1960s. In 2007, Department of Defense test ranges acquired access to new C-band frequency ranges (4400 4950 and 5091 5150 MHz). While these new bands offer a substantial increase in the total bandwidth available for flight test telemetry, traditional S-band operations will continue for many years, due in part ...

This Phase II STTR program seeks a new fabrication method to produce stronger (>100 kpsi) and tougher (>10 MPam1/2) ultra-high temperature HfC-based composites (UHTC) with an outstanding oxidation resistance for advanced rocket nozzle throat components. UES will apply a novel"Top Down"approach to control the microstructures of the composites. This approach will produce a very unique grain structur ...