Award Data

Metallic additive manufacturing (AM) is an attractive technology for the production of lethality test articles due to the potential for significantly reduced lead time and manufacturing cost.However, in order to be effective in providing accurate lethality data, the properties of the AM material have to match closely the properties of conventionally manufactured alloys found in real threat targets ...

Future MDA space missions will utilize small spacecraft with correspondingly small, advanced sensor systems. Cooling of these sensors is required to decrease detector noise and increase detector sensitivity by maintaining the detector at a reduced operating temperature. The cooling system comprises a mechanical cryocooler and its control electronics, both of which are critical technologies to enab ...

Presently the missile defense systems are using a reactive and program-centric framework for assessing industrial base risk. The Phase I effort focused on developing a wide and deep network algorithm using Industrial Product-Support Vendor (IPV) Gen II program for predicting the probability of failure. The proposed Phase II effort leverages the Phase I work and will focus on three main goals:(1) I ...

Infrasound and seismic measurements are used by DTRA and the DoD for nuclear test monitoring, terrorist blast forensics, battle damage assessment, and environmental monitoring. However, these long wavelength physical signals are typically recorded through single-point sensors or sparse low density arrays. As a result, the critical signals of interest are often corrupted or masked by noise or inter ...

The proposed project aims to pursue an innovative approach of utilizing deep learning algorithms to improve the performance of state-of-the-art MEMS Inertial Measurement Units (IMUs) to push their performance to fullest extent possible as replacements for existing Fiber Optic Gyroscopes (FOG) systems for navigation and guidance in future missile system avionics including Sounding Rockets. During P ...

This work advances the state-of-the-art in high-speed diagnostics for the characterization of fireballs, hot gases, and aerosols released by explosives detonation.The proposed advancement is the development of an integrated optical sensor suite, selected from technologies which are already in development in the portfolio of the proposers.During Phase I, the proposers demonstrated the combined LIBS ...

Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...

Magnesium alloys have 35% lower density compared to aluminum, with improved temperature stability compared to high strength aluminum.They can also be fabricated with minimum gauge thicknesses considerably thinner than fiber composites, and are weldable, with much higher impact resistance.Traditional magnesium alloys, however, have had lower strengths than more developed aluminum alloys.Powder meta ...

Optonicus proposes development of the TAP-LAM (Test Article Printing with Laser Additive Manufacturing for Threat Surrogate Target Production) powder bed fusion and directed energy depositions systems. The TAP-LAM metal additive manufacturing system will advance strategic missile defense system testing capabilities by improving 3D printing methods to rapidly produce large-scale threat surrogate ta ...

Contractor will develop innovative concepts and techniques to develop target recognition approaches focused on cognitive synthesis of current and emerging sensor data sources.(Approved for Public Release 15-MDA-8482 (17 November 15))