Award Data

This effort will augment the capabilities of an existing all reflecting, confocal FTIR microscope to allow for digital holographic imaging as wellspectral content determination at video frame rates. The use of a dual beam frequency comb, with a beam path coincident with the pathrequired for the digital holographic imaging, will allow spectral determination of any organism being holographically ima ...

Future MDA space missions will utilize small spacecraft with correspondingly small, advanced sensor systems. Cooling of these sensors is required to decrease detector noise and increase detector sensitivity by maintaining the detector at a reduced operating temperature. The cooling system comprises a mechanical cryocooler and its control electronics, both of which are critical technologies to enab ...

To meet the demands of the MDA16-T005 STTR solicitation, the MaXentric/UTK team proposes the MaXPMFT, which exploits a wideband software defined radio architecture to create a transmitter with programmable output frequency. The flexible system will provide the ideal solution for current and future missile flight test telemetry needs through its compatibility with nearly all missile platforms and s ...

Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare is developing hermetic garment closure systems that seal macroscopic and microscopic gaps at interfaces and closures and provide high ...

Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...

The objective of the research is to produce a technology that will effectively automate the processes of recognizing security threats to BMDS under the conditions of unpredictable dynamic situations and the periods of heightened alerts. Our method will provide human operators with results in the context of tactical and operational BMDS situations and gives sufficient explanations needed for future ...

The objective of this proposal is to develop enhanced clutter and interference suppression methods to perform target detection and identification in presence of a cluttered environment. In addition, protection against mainbeam jamming is also addressed here using distributed Multiple Input Multiple Output (MIMO) sensor technology. For this purpose smart transmit beamforming using together with ad ...

Based on the success of our Phase I feasibility research, we propose to continue the project for the automated objective speech intelligibility assessment system. It consists of a pair of head and torso simulators placed at the same distance as typical face-to-face communication, a power amplifier, a laptop computer, a speech recognizer, and console software. The simulator has acoustic properties ...

Future missile detection systems will require improved thermal management for cooling gimbal-mounted sensors and optics. Current systems utilize cryocoolers placed on the gimbal, which necessitates the cryocooler heat to be rejected directly from the gimbal. A far superior approach in terms of payload mass would locate the warm elements of the cryocooler on the stationary platform near the space ...

A personal air ventilation system (PAVS) can dramatically improve the environment inside chemical/biological protective clothing, protecting the health and safety of soldiers and enabling peak physical/mental performance for long periods. However, existing air blowers that can produce the flow rate and pressure drop needed for a PAVS are too heavy, inefficient, and noisy for a man-portable system ...