You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Green Monopropellant Thruster TRL Maturation Scaling Effort

    SBC: CREARE LLC            Topic: MDA12T008

    Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  2. Control Electronics for Space-Qualified Cryogenic Coolers

    SBC: CREARE LLC            Topic: MDA17T003

    Future MDA space missions will utilize small spacecraft with correspondingly small, advanced sensor systems. Cooling of these sensors is required to decrease detector noise and increase detector sensitivity by maintaining the detector at a reduced operating temperature. The cooling system comprises a mechanical cryocooler and its control electronics, both of which are critical technologies to enab ...

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  3. Lightweight Deployable Nosecone for SM3 BLK IIB

    SBC: MENTIS SCIENCES INC            Topic: MDA10015

    This Statement of Work (SOW) defines the support required for a multi-task effort related to the design and fabrication of a ceramic resin matrix composite nosecone to fulfill Block IIB mission requirements. MSI will develop composite material component designs that fulfill the aerothermal and structural requirements established by Raytheon Missile Systems (RMS) and the SM3 Program Office, an ...

    SBIR Phase II 2013 Department of DefenseMissile Defense Agency
  4. Contamination-Free, Lightweight, Helium-Rubidium Vapor Circulation System

    SBC: CREARE LLC            Topic: MDA12018

    Diode-Pumped Alkali Laser Systems (DPALS) have great potential for missile defense and other applications. These systems require a uniform, steady, flowing mixture of helium and rubidium vapor at elevated pressure and temperature. Significant challenges exist because rubidium is a very reactive material. In response, our team proposes to develop a contamination-free, all-metal, hermetic, circul ...

    SBIR Phase I 2013 Department of DefenseMissile Defense Agency
  5. HEL Analysis Tool with Experimentally Corroborated DPAL Rate Coefficients

    SBC: CREARE LLC            Topic: MDA12T008

    Diode-Pumped Alkali Laser Systems (DPALS) have great potential for missile defense and other applications. Proper design of these systems is challenging because many interrelated processes impact their performance and critical kinetic rate coefficients are not well known. In response, our team proposes to develop a comprehensive physics-based analysis/design tool, and determine key kinetic rate ...

    STTR Phase I 2013 Department of DefenseMissile Defense Agency
  6. Thermal Isolation of Nozzle Exit Cone Insulators

    SBC: MENTIS SCIENCES INC            Topic: MDA12027

    To address the issue of heat transfer from the rocket motor nozzle exit cone into the metal support housing MSI proposes to apply a well-developed, highly insulating interlayer material, quartz polysiloxane Qz/Ps, between the exit cone surface and the metal substructure surface to maintain that surface below 150 degrees F. MSI has tested this material for fabrication of a number of high performan ...

    SBIR Phase I 2013 Department of DefenseMissile Defense Agency
  7. Passive IR Sensors Based on High Quantum Efficiency P-on-N Type-II Strained Layer Superlattices

    SBC: QMAGIQ LLC            Topic: MDA06013

    We propose to develop a high-performance longwave infrared focal plane array (FPA) based on Type-II InAs/(In)GaSb strained-layer-superlattice (SLS) technology and deliver it packaged in a portable handheld CAMERA. In Phase 1, a matrix of recipes was designed and grown, several wafers were processed, arrays were fabricated and characterized, and material and process issues identified. In Phase 2, ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  8. An Advanced Thermal Management System for Gimbal-Mounted Sensors

    SBC: CREARE LLC            Topic: MDA07004

    Future missile detection systems will require improved thermal management for cooling gimbal-mounted sensors and optics. Current systems utilize cryocoolers placed on the gimbal, which necessitates the cryocooler heat to be rejected directly from the gimbal. A far superior approach in terms of payload mass would locate the warm elements of the cryocooler on the stationary platform near the space ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  9. Longwave Infrared Focal Plane Arrays for Missile Tracking at High Frame Rates

    SBC: QMAGIQ LLC            Topic: MDA07015

    Missile seekers would benefit from a focal plane array (FPA) that allowed high-speed single or multiple-windowing acquisition of the target or targets while maintaining situational awareness of the rest of the field of view. Such data reduction helps where bandwidth is limited, e.g. arrays with formats larger than 1Kx1K, allowing tracking of high-speed missiles at high frame rates. Readout multi ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  10. Ultra-Large-Format 2Kx2K 2-Color Midwave/Midwave Infrared Focal Plane Array for the AirBorne Laser Program

    SBC: QMAGIQ LLC            Topic: MDA07032

    We propose to develop a 2Kx2K 2-Color focal plane array (FPA) that provides pixel-registered and simultaneous imaging in two MIDWAVE infrared spectral bands. We will use a novel bandgap-engineered sensor that minimizes spectral crosstalk between the two midwave bands better than current sensor technologies. The FPA also uses a readout multiplexer that provides massive on-chip data compression by ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government