You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 4424 results
  1. A Novel Device for Ultra-Rapid Non-Pharmacologic Ocular Anesthesia

    SBC: Irenix Medical, Inc.            Topic: NEI

    PROJECT SUMMARY / ABSTRACTThe objective of this Phase II proposal is to further develop a novel device for ocular anesthesia based on thermo-electric cooling. Intravitreal injection therapy (IVT) is one of the most commonly performed procedures in all of medicine, with approximately 7 million injections in the USA in 2016. Ocular anesthesia is required, both for patient safety and for tolerability ...

    SBIR Phase II 2018 Department of Health and Human ServicesNational Institutes of Health
  2. TOPIC 360: A SIMPLE END-TO-END SYSTEM FOR SERIAL CELL SORTING AND MANIPULATION USING A SINGLE CONTAINER

    SBC: DIAGNOLOGIX, LLC            Topic: NCI

    Chemotherapy may control but rarely cure metastatic cancers. Remarkably, modern immunotherapies, including cell-based therapies, have cured metastatic melanomas and other types of cancers. A major challenge for all cell therapies in general is the need to develop cost-effective and efficient manufacturing and delivery capabilities. We have recently established an innovative cell isolation technolo ...

    SBIR Phase I 2018 Department of Health and Human ServicesNational Institutes of Health
  3. Prospective evaluation of a surgical solution for breast cancer-associated lymphedema

    SBC: Fibralign Corporation            Topic: 102

    Project Summary/Abstract Prospective evaluation of a surgical solution for breast cancer-associated lymphedema The proposed project will complete remaining key research and technology requirements that are needed to commercialize a ground-breaking interventional device for treating secondary lymphedema -- a chronic and debilitating disease that currently has no cure and impacts an estimated 15-30% ...

    SBIR Phase II 2018 Department of Health and Human ServicesNational Institutes of Health
  4. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC.            Topic: DLA171002

    Maintaining the many types of weapons systems within the Department of Defense (DoD) is a tremendous task and procuring replacement components is made especially difficult due to obsolescence and often time, excessive pricing. Many components are no longer available from the Original Equipment Manufacturer (OEM) and the DoD does not have sufficient documentation to develop new suppliers. A new, s ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. Reverse Engineering NSN 5985-01-519-6245

    SBC: MENTIS SCIENCES INC            Topic: DLA171002

    Aging military infrastructure is constantly in the need of replacement and upgrades. Competent and qualified domestic producers of these mission vital items are becoming increasingly scarce leading to fewer sources and less competition in the marketplace. To ensure that warfighters are properly equipped to perform their missions it is critical to have a reliable and sustainable supplier base wit ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: DLA171002

    San Diego Composites, Inc. (SDC) will provide the Defense Logistics Agency (DLA) qualified environmentally stable composite (ESC) replacement parts as an alternative source of supply for the parts on the DLA published Land and Maritime Replenishment Parts Purchase or Borrow and Limited Source Candidate Parts lists. SDCs ESC parts can be produced up to 75% faster, require up to 98% less preventativ ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Develop Alternate Source of Supply for NSN 6130-015487556 Battery Charger

    SBC: SPECTRAL LABS INCORPORATED            Topic: DLA171002

    During Phase I, Spectral labs proposes using our multi-disciplined engineering, quality assurance, and production staff to reverse engineer an NSN 6130-015487556 Battery Charger, P/N RF-5853-CH106 in order to become an approved source. We will prepare a Source Approval Request (SAR) which includes a complete Technical Data Package and Test Plans. Following established ISO 9001 certified processes, ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. Shipboard Dimensional Analysis Tool (SDAT)

    SBC: DESIGN MILL, INC.            Topic: N172101

    Shipboard Dimensional Analysis Tool (SDAT) will enable transportability assessments of candidate vehicle designs aboard Naval ships prior to prototyping. SDAT will integrate three-dimensional (3D) ship and vehicle data, enable users to place and visualize vehicles and their path within ship vehicle stowage spaces and on ramps, enable collision detection based on a user-defined clearance, assess ph ...

    SBIR Phase I 2018 Department of DefenseNavy
  9. Assistive Compact Convolutional Enhanced Neural Targeting System

    SBC: Physical Optics Corporation            Topic: N172102

    To address the Marine Corps need, Physical Optics Corporation (POC) proposes to develop a new Assistive Compact Convolutional Enhanced Neural Targeting (ACCENT) system based on a new design using convolutional neural network (CNN) software implemented on embedded hardware for assisted target recognition and laser pointing. Specifically, the innovation in image processing algorithms and automatic t ...

    SBIR Phase I 2018 Department of DefenseNavy
  10. Automated Manufactured Multi-Functional Composite Rigid Wall Shelter

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: N172103

    San Diego Composites, Inc. (SDC) will design, build, test, and produce the automated manufactured multi-Functional Composite Rigid Wall Shelter (CRWS). The CRWS will be manufactured utilizing automated robotic and CNC manufacturing techniques. The automated manufactured shelters will meet ISO standards for 9-high stacking while weighing less than 70% of the existing aluminum/steel construction. Th ...

    SBIR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government