List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Replacements for PVC and PE Water Pipes

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER1C

    METSS proposes to design a novel polymer system based on polypropylene with covalently attached antioxidants to mitigate issues with chemical permeation and water quality with current waterpipe materials. Polypropylene was selected as it has inherently good physical properties and low permeability that will limit chemical migration from the outside, addressing one critical factor impacting water q ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Decontamination of Category A Viruses on Porous Surfaces and Sensitive Equipment

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER4A

    METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Selective Inhibition of Platelet GPIb-alpha Binding to Leukocyte Mac-1 as a Therapeutic for Multiple Sclerosis

    SBC: SUJANA BIOTECH, LLC            Topic: 106

    ABSTRACT The principal overall objective of this project is the development of novelsafer and more effective therapy for Multiple SclerosisMSspecifically a monoclonal antibodymAbthat disrupts the interaction between leukocytesMacand plateletsGPIbwhich have been implicated in the pathophysiology of MSMS is a chronic inflammatory disease of the CNSaffecting approximatelymillion people worldwidein wh ...

    SBIR Phase I 2018 Department of Health and Human Services
  4. OnTRACK: Mobile Application for Pediatric Post-TBI Patient Management

    SBC: CREARE LLC            Topic: NCIPC

    PROJECT SUMMARYCreare and its clinical and research partners propose to develop a software platformOnTRACKOnline Treatment Recovery Assistance for Concussion in Kidsfor children and adolescents recovering from concussion or mild traumatic brain injurymTBIThe platform includes a mobile applicationappfor the patients and their care teamparentsteacherscoachesetca database serverand a decision support ...

    SBIR Phase I 2018 Department of Health and Human Services
  5. Making Standing Balance The Fifth Vital Sign in Clinical Settings

    SBC: Bertec Corporation            Topic: NIA

    Falls are a significant source of early morbidity and mortality in the aging populationyet the neurologicalsensoryand motor changes that lead to increased fall risk often escape early identification and interventionVital signs are commonly used in clinical settings to assess the cardiovascular systemblood pressureheart rateimmune systembody temperatureand the respiratory systemrespiratory rateto e ...

    STTR Phase I 2018 Department of Health and Human Services
  6. Increase Product Availability And Improve Life Cycle Support For MILSATCOM System Components

    SBC: Mentis Sciences, Inc.            Topic: DLA182005

    Mentis Sciences Inc. (Mentis) proposes to develop a refurbishment program that is capable of disassembling, inspecting, and re-building complex systems and components, with the initial system of focus being the Minuteman Missile Antenna/Antenna Pedestal Assembly.To become a refurbishment supplier, Mentis will develop and adapt inhouse processes for performing refurbishment services by leveraging c ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Tamper Resistant/Anti-Counterfeit Package Labeling

    SBC: H NU PHOTONICS LLC            Topic: DLA163003

    The Defense Logistics Agency (DLA) top priority is warfighter support, and the DLA is firmly committed to a robust counterfeit mitigation strategy that protects our warfighters and the vital missions they perform.HNu Photonics, LLC (HNu) Color Holographic Quick Response (CHQR, pronounced Checker) technology combines RGB 3-layer QR codes with holographic imaging technology, and is as robust as DNA ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  8. Green Monopropellant Thruster TRL Maturation Scaling Effort

    SBC: CREARE LLC            Topic: MDA12T008

    Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  9. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  10. Carbon Nanotube Windshield Heater

    SBC: CREARE LLC            Topic: N182103

    Creare is proposing to develop a heater utilizing carbon nanotubes (CNTs) that will have high temperature uniformity and high optical transmission with low glare. By creating a variable effective sheet resistance across the windshield, we will be able to produce a robust design that can be flexed and easily scaled up to a production environment. In Phase I, we will fabricate and test a coupon size ...

    SBIR Phase I 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government