You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Provably Unclonable Functions on Re-configurable Devices

    SBC: IERUS TECHNOLOGIES INC            Topic: A18BT001

    The ability to authenticate electronic devices is an important step towards modernizing the hardware/software of our Nations communication systems. Protecting these targeted networks and devices from malicious cyber-based attacks is becoming increasingly important as the technological and cyber capabilities of our adversaries continue to advance. In addition to network security, device authenticat ...

    STTR Phase I 2018 Department of DefenseArmy
  2. OnTRACK: Mobile Application for Pediatric Post-TBI Patient Management

    SBC: CREARE LLC            Topic: NCIPC

    PROJECT SUMMARYCreare and its clinical and research partners propose to develop a software platformOnTRACKOnline Treatment Recovery Assistance for Concussion in Kidsfor children and adolescents recovering from concussion or mild traumatic brain injurymTBIThe platform includes a mobile applicationappfor the patients and their care teamparentsteacherscoachesetca database serverand a decision support ...

    SBIR Phase I 2018 Department of Health and Human ServicesCenters for Disease Control and Prevention
  3. Increase Product Availability And Improve Life Cycle Support For MILSATCOM System Components

    SBC: MENTIS SCIENCES INC            Topic: DLA182005

    Mentis Sciences Inc. (Mentis) proposes to develop a refurbishment program that is capable of disassembling, inspecting, and re-building complex systems and components, with the initial system of focus being the Minuteman Missile Antenna/Antenna Pedestal Assembly.To become a refurbishment supplier, Mentis will develop and adapt inhouse processes for performing refurbishment services by leveraging c ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Tamper Resistant/Anti-Counterfeit Package Labeling

    SBC: H NU Photonics LLC            Topic: DLA163003

    The Defense Logistics Agency (DLA) top priority is warfighter support, and the DLA is firmly committed to a robust counterfeit mitigation strategy that protects our warfighters and the vital missions they perform. HNu Photonics, LLC (HNu) Color Holographic Quick Response (CHQR, pronounced “Checker”) technology combines RGB 3-layer QR codes with holographic imaging technology, and is as robust ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  5. Green Monopropellant Thruster TRL Maturation Scaling Effort

    SBC: CREARE LLC            Topic: MDA12T008

    Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  6. Multiphase Modeling of Solid Rocket Motor Internal Environment

    SBC: CFD RESEARCH CORPORATION            Topic: T1

    Solid rocket motor (SRM) design requires detailed understanding of the slag accumulation process in order to: predict thrust continuity, optimize propellant conversion efficiency, predict coning effects from sloshing, and to assess potential orbital debris (slag) hazard. Current state-of-the-art models for SRM environment do not have the capability to simulate the accumulation and dynamics of slag ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  7. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion During Early Lift-Off

    SBC: CFD RESEARCH CORPORATION            Topic: T1

    Launch vehicles experience extreme acoustic loads dominated by rocket plume interactions with ground structures during liftoff, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling turbulent plume physics are too dissipative to accurately resolve the acoustic propagation and detailed vehicle ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. Carbon Nanotube Windshield Heater

    SBC: CREARE LLC            Topic: N182103

    Creare is proposing to develop a heater utilizing carbon nanotubes (CNTs) that will have high temperature uniformity and high optical transmission with low glare. By creating a variable effective sheet resistance across the windshield, we will be able to produce a robust design that can be flexed and easily scaled up to a production environment. In Phase I, we will fabricate and test a coupon size ...

    SBIR Phase I 2018 Department of DefenseNavy
  9. Non-surgical treatment option for pelvic organ prolapse

    SBC: REIA LLC            Topic: NICHD

    Project SummaryAbstract Reia is working to address a prevalent gynecological conditionpelvic organ prolapsePOPwhich affects more thanof women over the age ofPOP occurs when the pelvic floor connective tissue and muscles weakenallowing the uterus or vaginal walls to descendIn extreme casesthe uterus descends through the opening of the vagina and hangs outside of the bodyPOP can be treated non surgi ...

    SBIR Phase I 2018 Department of Health and Human ServicesNational Institutes of Health
  10. Analysis and Application of Treatments to Mitigate Exfoliation Corrosion (Delamination) of 5XXX Series Aluminum

    SBC: OCEANIT LABORATORIES INC            Topic: N18AT016

    Oceanit proposes to research and develop chemical or non-chemical methods and processes to impart surface morphology modifications to aluminum-magnesium (Al-Mg) alloys to mitigate and increase the exfoliation corrosion resistance.

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government