You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Integrated Icing Detection Filter for On-Demand Aircraft
SBC: CONTINUUM DYNAMICS INC Topic: A1New classes of aircraft, providing personal, on-demand mobility, are under development and are poised to revolutionize short-duration air travel. The impetus for this work comes from advances in electronics and controls, and increases in electric motor power densities. As these aircraft are integrated into the transportation system, they will encounter icing conditions that may challenge the des ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Discrete Time State-Space Aeroservoelastic Modeling using FUN3D
SBC: ZONA TECHNOLOGY INC Topic: A1CFD-based reduced order modeling (ROM) has been an active research area, as they can be used directly with common linear flutter analysis tools. Among them, linearized reduced-order modeling approaches rely on linearization of the nonlinear unsteady aerodynamic flow equations, assuming that the amplitude of the unsteady motion is limited to small perturbations about the nonlinear steady-state flow ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Resilience-Based Optimization of Space Systems
SBC: Magnin, Michael Topic: H6With future missions of increasing complexity, duration, distance, and uncertainty, there has been a growing need for methods and tools that can permit the effective formation of early stage conceptual designs that are not only cost-effective, but also productive and resilient to failures. Current approaches are mostly tailored to evaluating independent systems but do not necessarily scale well to ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Tunable Single Frequency UV Laser
SBC: ADVALUE PHOTONICS INC Topic: S1Compact and rugged single-frequency pulsed UV lasers are needed for measurement of ozone and the hydroxyl radicals (OH). The determination of the concentration of OH in the atmosphere is central to the understanding of atmospheric photochemistry. The goal for this SBIR Phase program is to demonstrate and build a highly robust high-power fast-tuning single frequency pulsed UV laser near 308nm for O ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Multi-Spectral Infrared Focal Plane Array For Wildfire And Burning-Biomass Analysis
SBC: QMAGIQ LLC Topic: S1An important NASA mission is to remotely analyze fires, such as wildfires and burning biomasses, for their chemical content. The chemical species of most interest have infrared spectral signatures at wavelengths ranging from 1.5 microns to 12 microns. A broadband infrared focal plane array (FPA) with that spectral coverage and high quantum efficiency is a key technology to enable this mission. Qma ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Improved X-Ray Filters with Al-Sc Alloys and Nanoparticle-Doped Polyimide
SBC: LUXEL CORP Topic: S1The next generation of detectors for high energy observatories needs a significant improvement in filter technology, as identified in the SBIR solicitation and as a PCOS technology gap. We propose a two-fold change in the state of the art of thin film EUV and x-ray filters, using Al-Sc alloy in place of Al and adding Au nanoparticles to polyimide. Al-Sc alloys show smaller grain sizes that should ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Optically Interrogated Thin Film Strain Gauge for Balloon
SBC: CREARE LLC Topic: S3To support development of atmospheric balloons and gossamer structures, NASA requires a capability for real-time, dynamic strain measurement in thin polymeric membranes during deployment and flight. This capability will provide quantitative test data to inform balloon design efforts, as well as enable real-time monitoring of material state during flight. Existing technologies include wired or wi ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
High Efficiency 4 K Cryocooler for Space Missions
SBC: CREARE LLC Topic: S1Future astrophysics missions require efficient, low-temperature cryocoolers to cool advanced instruments or serve as the upper stage cooler for sub-Kelvin refrigerators. Potential astrophysics missions include Lynx, the Origin Space Telescope, and the Superconducting Gravity Gradiometer. Cooling loads for these missions are up to 300 mW at temperatures of 4 to 10 K, with additional loads at higher ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Wafer Level Hybrid Interconnect Aligned (Cu/Oxide) Bonding for 3D Integration of Heterogenous (Si/GaAs) Submillimeter-Wave Arrays
SBC: CACTUS MATERIALS, INC. Topic: S1The objective of this work is to develop millimeter wave arrays with ultra-high accuracy alignment (
SBIR Phase I 2018 National Aeronautics and Space Administration -
ASOMIS
SBC: APPLIED GEOSOLUTIONS LLC Topic: S5The innovation of the Agricultural SOil Moisture and Irrigation Status (A·SOM·IS) platform is the development of operational and moderate resolution mapping and assessment of soil moisture, irrigation status (irrigated vs not), and crop water stress metrics at field scale for agricultural decision support tools. The platform focuses on utilization of Synthetic Aperture Radar (SAR) and blends SAR ...
SBIR Phase I 2018 National Aeronautics and Space Administration