You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Increase Product Availability And Improve Life Cycle Support For MILSATCOM System Components

    SBC: Mentis Sciences, Inc.            Topic: DLA182005

    Mentis Sciences Inc. (Mentis) proposes to develop a refurbishment program that is capable of disassembling, inspecting, and re-building complex systems and components, with the initial system of focus being the Minuteman Missile Antenna/Antenna Pedestal Assembly.To become a refurbishment supplier, Mentis will develop and adapt inhouse processes for performing refurbishment services by leveraging c ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Evaluation of Rotating Detonation Rocket Engines for Booster or Upper Stage Launch Vehicles: The Next Step Towards Flight Development

    SBC: GHKN Engineering, LLC            Topic: AF181030

    Having previously designed, built and successfully tested a Rotating Detonation Rocket Engine (RDRE), GHKN Engineering proposes to evaluate the feasibility of RDRE technology for boost or upper stage propulsion for launch of small satellites to LEO. RDREs represent an innovative new rocket technology that harnesses the potential of continuous detonation combustion in elegant, compact, annular desi ...

    SBIR Phase I 2018 Department of DefenseAir Force
  3. Air Platform Passive Occupant Protection

    SBC: SAFE INC            Topic: A18001

    Body flailing during a severe helicopter crash can lead to injury or death when the head and upper torso strike rigid objects within the flail envelope.Currently fielded restraint systems allow a large flail envelope because the strap routing and anchor positions require some body motion to occur before the straps can develop significant reaction loads.Safe, Inc. (Safe) is proposing an alternate d ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. A Balanced Photodetection Fiber-optic Link Using a Dual-Core Fiber

    SBC: Eospace Inc.            Topic: N182101

    A high-fidelity RF/Analog fiber-optic link based on a balanced photodetection using a dual-output modulator and a balanced photodetector pair offers significant improvement in RF gain, low noise figure (NF) and enhanced spur-free dynamic range (SFDR). It requires the use of path-length matched dual fibers to achieve proper noise cancellation. The objective for this SBIR is to develop a balanced fi ...

    SBIR Phase I 2018 Department of DefenseNavy
  5. SOURCE APPROVAL REQUEST (SAR) FOR MULTIPLE ITEMS and First Article

    SBC: NDI ENGINEERING COMPANY            Topic: DLA171002

    This proposal seeks NDI Engineering Company (CAGE code: 4X596) to become approved as apotential source of supply to DLA for the MK 2 Nose Gear Launch Shaft Assembly, NAVAIRpart number 511224-1; Shaft, Shouldered, NSN 3040-00-224-9019. In Phase I, NDIEngineering Company submitted one a Source Approval Request (SAR) for the manufacturingof the Shaft Assembly defined as NAVAIR part number 511224-1. I ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  6. Multicore Fiber Optic Connector for Wideband Digital and Analog Photonic Links

    SBC: Chiral Photonics, Inc.            Topic: N182102

    Fiber optic data links are attractive for their wide bandwidth, low weight, electromagnetic interference immunity and ability to transmit high fidelity analog and digital radio-frequency-over-fiber (RFoF) signals. Multicore fiber (MCF) links will provide even higher capacity and density and enhance dynamic range analog links using parallel fibers of precisely equal length. The need for a high-qual ...

    SBIR Phase I 2018 Department of DefenseNavy
  7. Carbon Nanotube Windshield Heater

    SBC: CREARE LLC            Topic: N182103

    Creare is proposing to develop a heater utilizing carbon nanotubes (CNTs) that will have high temperature uniformity and high optical transmission with low glare. By creating a variable effective sheet resistance across the windshield, we will be able to produce a robust design that can be flexed and easily scaled up to a production environment. In Phase I, we will fabricate and test a coupon size ...

    SBIR Phase I 2018 Department of DefenseNavy
  8. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: Brighton Cromwell LLC            Topic: DLA171002

    In Phase 1, we obtained samples through the RPPOB process, performed due diligence, reverse engineered, created engineering drawings, performed positive material identifications, assigned proper quality control documentation, and all pertinent technical activities to complete a technical data package in accordance with the DLA requirements and submit a SAR for evaluation and acceptance. In this pr ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  9. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: Brighton Cromwell LLC            Topic: DLA171002

    This proposal introduces an approach from Brighton Cromwell to Improve product availability and increase competition through thedevelopment of Small Business eligible manufacturing utilizing the DLAs Land and Maritime (L&M) Limited Source National Stock Number(NSN) List. The list contains NSNs with an Annual Demand Value (ADV) >$10K currently sourced with only 1-2 manufacturers. We are offering to ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  10. Tamper Resistant/Anti-Counterfeit Package Labeling

    SBC: UTILITY DEVELOPMENT CORP            Topic: DLA163003

    The objective will becontinue the progress made in Phase I program for anti-counterfeiting label/tape solutions which are easy to deploy through the existing DLA supply chain. We willdemonstratethe technologies withtamper and counterfeit detection capabilities. A comprehensive report will be submitted that will include the results of the demonstration, describes how the technology might be impleme ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government