Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Novel Methods to Measure Penetrator Dynamics in Multi-Layer Geometries

    SBC: Thornton Tomasetti, Inc.            Topic: DTRA07011

    In Phase I of this effort we analyzed the structural response of a BLU 109 during typical penetration events. Based on these finite element results, we proposed and demsonstrated a simple robust concept for a passive penetrator sensor that identifies the material being penetrated and also correlates strongly with its underground trajectory. Such a sensor would obviously provide valuable informatio ...

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  2. Real-Time Portable Neutron Spectroscopy

    SBC: Michigan Aerospace Corporation            Topic: DTRA07002

    A critical gap in homeland security is the inability to efficiently detect and identify kilogram-size samples of Special Nuclear Materials (SNM, uranium and transuranic elements). Penetrating neutron emission is unique to fissionable material and difficult to obscure with passive shielding. The current state of the art in neutron imaging is not suitable for field applications. Michigan Aerospace ...

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  3. The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics

    SBC: Orora Design Technologies, Inc.            Topic: DTRA07005

    Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  4. DEVELOPMENT OF A RESIDUAL IN-SITU STRESS GAUGE

    SBC: Terra Tek Inc.            Topic: N/A

    QUANTITATIVE VERIFICATION OF THE RESIDUAL IN-SITU STRESS FIELD WHICH CREATES THE CONTAINMENT CAGE IS NEEDED TO ASSESS THE FACTOR OF SAFETY AGAINST HYDRAULIC FRACTURING FROM THE CAVITY WALL. PHASE I WILL ESTABLISH THE FEASIBLITY OF DEVELOPING A PASSIVE STRESS GAUGE, ABSENT OF ACTIVE INSTRUMENTATION, AND CAPABLE OF RECORDING THE RESIDUAL IN-SITU STRESS FIELD IMMEDIATELY FOLLOWING THE NUCLEAR DEVICE ...

    SBIR Phase II 1991 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government