You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Hermetic Seals for Chemical/Biological Protective Garments
SBC: CREARE LLC Topic: CBD13109Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare is developing hermetic garment closure systems that seal macroscopic and microscopic gaps at interfaces and closures and provide high ...
SBIR Phase II 2018 Department of DefenseOffice for Chemical and Biological Defense -
Novel Methods to Measure Penetrator Dynamics in Multi-Layer Geometries
SBC: Thornton Tomasetti, Inc. Topic: DTRA07011In Phase I of this effort we analyzed the structural response of a BLU 109 during typical penetration events. Based on these finite element results, we proposed and demsonstrated a simple robust concept for a passive penetrator sensor that identifies the material being penetrated and also correlates strongly with its underground trajectory. Such a sensor would obviously provide valuable informatio ...
SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency -
The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics
SBC: Orora Design Technologies, Inc. Topic: DTRA07005Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (
SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency -
Omni-Directional, Wind and Water Tolerant Inlet for the DFU
SBC: ENERTECHNIX, INC. Topic: CBD07116The current DFU inlet exhibits poor aerosol sampling efficiency at high wind speeds. This project will develop an improved inlet with very high sampling efficiency for 1 to 20 micron particles at wind speeds up to 30 mph independent of wind direction. The project is focused on the DFU, but our Aerodynamic Next Generation Inlet (ANGI) will be beneficial for any high volume aerosol sampling applicat ...
SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense -
Automated Objective Speech Intelligibility Assessment System
SBC: LI CREATIVE TECHNOLOGIES INC Topic: CBD07106Based on the success of our Phase I feasibility research, we propose to continue the project for the automated objective speech intelligibility assessment system. It consists of a pair of head and torso simulators placed at the same distance as typical face-to-face communication, a power amplifier, a laptop computer, a speech recognizer, and console software. The simulator has acoustic properties ...
SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense -
Lightweight, Efficient Blower for Personal Air Ventilation System
SBC: CREARE LLC Topic: CBD07115A personal air ventilation system (PAVS) can dramatically improve the environment inside chemical/biological protective clothing, protecting the health and safety of soldiers and enabling peak physical/mental performance for long periods. However, existing air blowers that can produce the flow rate and pressure drop needed for a PAVS are too heavy, inefficient, and noisy for a man-portable system ...
SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense -
Hybrid Reactive Materials for Thermobaric Weapons
SBC: REACTIVE METALS, INC. Topic: DTRA06010It is proposed to produce and evaluate hybrid powders containing highly reactive filler coated by or embedded into a matrix of readily boiling, combustible binder. The binder material, such as paraffin wax and Viton-like rubber, are expected to ignite and burn within the expanding fireball while the reactive filler remains at the relatively low temperature at which the binder boils, and thus rema ...
SBIR Phase II 2007 Department of DefenseDefense Threat Reduction Agency -
New Methods for Progressive Collapse Testing and Simulation
SBC: Thornton Tomasetti, Inc. Topic: DTRA06003The potential for progressive collapse of buildings damaged by terrorist blasts represents a significant risk to building occupants. There is a need for software tools that assess the potential for progressive collapse of above ground structures. These tools should run quickly and accurately predict the collapsed region of a damaged structure. These tools would be of great value to security pla ...
SBIR Phase II 2007 Department of DefenseDefense Threat Reduction Agency -
Unique Conducting Polymer-Coated, Metallized Microporous Membranes with High Electro-Osmotic Function for Chem-Bio Protection
SBC: Ashwin-Ushas Corporation Topic: CBD06105In prior and ongoing, unrelated work in electrochromics, this firm developed unique, thin, flexible, double-sided, metallized (Au, Pt), microporous membranes, incorporating Conducting Polymer (CPs). Expected to have very high electro-osmotic flow capacities, they are useful for active water vapor transport through CBD-protective membranes for military uses such as hardened military facilities, s ...
SBIR Phase II 2007 Department of DefenseOffice for Chemical and Biological Defense -
Flexible Composite Chemical, Biological, Radiological, and Nuclear (CBRN) Barrier for the Joint Expeditionary Collective Protection System
SBC: UTILITY DEVELOPMENT CORP Topic: CBD05124The main objective will be to optimize the formulations developed and tested during the Phase I program for a high-performance, flexible, composite barrier that provides protection from Chemical, Biological, Radiological, and Nuclear agents and Toxic Industrial Materials. UDC will work toward the further improvement of chemical agent protection so that these flexible composite barriers will be ...
SBIR Phase II 2007 Department of DefenseOffice for Chemical and Biological Defense