Award Data

The DoD faces mounting costs for integrated circuits built with advanced technology. Our proposal addresses mixed-signal ASIC design costs and fabrication costs, notably photomask costs and photolithography costs. The ADONIS 1D design methodology has been demonstrated at technologies ranging from 130nm to 16nm. In Phase I of the program, we used ADONIS to design a reference circuit a high-speed c ...

Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

In Phase I of this effort we analyzed the structural response of a BLU 109 during typical penetration events. Based on these finite element results, we proposed and demsonstrated a simple robust concept for a passive penetrator sensor that identifies the material being penetrated and also correlates strongly with its underground trajectory. Such a sensor would obviously provide valuable informatio ...

The proposed Phase II effort investigates innovative finite element formulations, alternative structural modeling procedures and modern parallel computational strategies to improve the computational performance of high fidelity simulation software for modeling the progressive collapse behavior of blast damaged buildings. Its goal is to reduce the time required to compute and visualize high fideli ...

A critical gap in homeland security is the inability to efficiently detect and identify kilogram-size samples of Special Nuclear Materials (SNM, uranium and transuranic elements). Penetrating neutron emission is unique to fissionable material and difficult to obscure with passive shielding. The current state of the art in neutron imaging is not suitable for field applications. Michigan Aerospace ...

Private veterinarians, most of whom work from small independent clinical practices, are a critical link in maintaining appropriate use of the antibiotics, hormones, and other pharmaceuticals that are vital to the health and welfare of livestock. VCPR.ORG will develop an Internet-based tool set designed to help veterinary practitioners serve their clients and protect public health, as well as guard ...

Traditional engineered wood products, ubiquitous in our lives, are a human health hazard due to the carcinogenic nature of the binders used and lack of economical alternatives. The potential of mycelium binders as an alternative has become a primary research focus for Ecovative. Through the Phase I portion of this grant, Ecovative has identified low density (160-480 kg/m^3) engineered wood product ...

Grow Plastics has a technology that has been demonstrated to generate sandwich core structures in thermoplastic products. This efficient structure allows the generation of plastic products which are equivalent in strength to solid products, yet use 1/3 of the material. This substantial material reduction allows the production of parts that are lower environmental impact (due to source reduction) a ...

Deep-frying is a very popular cooking technique that is used worldwide. Deep-frying gives a crispy texture to food and creates savory flavors. Since it is one of the costlier kitchen commodities, frying oil is typically reused several times before being discarded. Using the oil for long periods of time is bad for the oil, causing it to degrade quickly, depending on the type of food being fried, te ...

This project seeks to further develop a broadly protective Swine Influenza (SIV) vaccine that Codagenix will test in collaboration with the USDA. In Phase I we proved the efficacy of our H1N1 and H1N2 vaccine candidates in swine and built a H3N2 vaccine candidate based on a field-relevant strain which we plan to further test in a trivalent formulation during Phase II. Our technology, termed Synthe ...