Award Data

In Phase II of PLATO, we will develop a prototype plan and goal identification system that employs a rich model of domain actions and events, extracted automatically from a massive amount of real-world domain-relevant information, to model agent-specific action costs and to process sequences of agent actions and events, extracted from text, as an agent plan in progress. The system will be able to ...

Neutron coincidence counters are currently based on 3H technology. A worldwide 3He shortage plus the need for significant improvements in performance necessitate the development of a new class of neutron detectors. We propose the use of boron-coated straw

In Phase II of JOLTER, we will develop several extensions and improvements upon the probabilistic graphical models developed in Phase I for discovering topics, entities, and relations jointly. The system will be able to (1) Discover and extend hierarchies of topics, entities, and relations; (2) Discover categories for events, multiway relations, and their roles; (3) Conditionalize the topics, ent ...

In Phase II of KEPLER, we will develop a prototype Knowledge Base (KB) expansion system that employs rich common-sense knowledge resources to perform high-quality scalable inference over a KB. The system will be able to (1) extract event parameters, event constructs, ontological relationships, definitional effects and inferences, and quantitative expectations from open text and structured resource ...

The DoD faces mounting costs for integrated circuits built with advanced technology. Our proposal addresses mixed-signal ASIC design costs and fabrication costs, notably photomask costs and photolithography costs. The ADONIS 1D design methodology has been demonstrated at technologies ranging from 130nm to 16nm. In Phase I of the program, we used ADONIS to design a reference circuit a high-speed c ...

In Phase I of this effort we analyzed the structural response of a BLU 109 during typical penetration events. Based on these finite element results, we proposed and demsonstrated a simple robust concept for a passive penetrator sensor that identifies the material being penetrated and also correlates strongly with its underground trajectory. Such a sensor would obviously provide valuable informatio ...

Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

EMPI will develop a commercially viable prototype of the nanoenergetic bullet (NEB) that was successfully demonstrated in the Phase I program. The program involves a series of experiments in year-one to test the critical functions of the NEB to safely neutralize IEDs and UXO. The program will culminate in year-two with a series of live fire tests against 155 mm artillery shells. The technology exp ...

It is proposed to produce and evaluate hybrid powders containing highly reactive filler coated by or embedded into a matrix of readily boiling, combustible binder. The binder material, such as paraffin wax and Viton-like rubber, are expected to ignite and burn within the expanding fireball while the reactive filler remains at the relatively low temperature at which the binder boils, and thus rema ...

The potential for progressive collapse of buildings damaged by terrorist blasts represents a significant risk to building occupants. There is a need for software tools that assess the potential for progressive collapse of above ground structures. These tools should run quickly and accurately predict the collapsed region of a damaged structure. These tools would be of great value to security pla ...