Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Ultra-Fast Photon-Sensing Integrated Circuit (PSIC) Small Arms Projectile Imager

    SBC: Wavefront Vision Inc            Topic: A17128

    Small arms round counting, strike detection, projectile trajectory mapping, infrared and visible muzzle flash sensing, and projectile velocity spectrum (subsonic to supersonic) analysis requires a highly accurate sensor capable of locating within one half caliber in strike location detection, and without missed event in iteration counting. We propose our ultra-fast Photon-Sensing Integrated Circui ...

    SBIR Phase I 2018 Department of DefenseArmy
  2. Data Security and Integrity Enhancements for Databases in the Tactical Environment

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: A17037

    Maxentrics solution provides multi-level security and information flow control with cell level encryption for existing relationaldatabases. At the tactical edge, access to advanced cloud based services such Apache Accumulo may not be possible.The novel database solution allows these types of services to be deployed in any point of the network, but also to be integrated in already existing applicat ...

    SBIR Phase II 2018 Department of DefenseArmy
  3. A Silicon Carbide Based Bidirectional DC-DC Converter

    SBC: CREARE LLC            Topic: A18103

    Electrical power system upgrades for next generation ground combat vehicles require technology advances such as higher operating temperature, greater power density, and increased functionality.Silicon Carbide (SiC) based power electronic devices offer advantages over silicon devices, especially for high voltage buses, and Creare is currently developing a SiC based DC DC converter that operates at ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Patient Transportable Tactical Combat Casualty Care Documentation Capability

    SBC: Cambridge Research & Development, Inc.            Topic: A18060

    CR&D will develop a hand-held, temporary tattoo printer designed to be used to print tattoos on the skin of warfighters at the POI or healthcare facility with the intent of replacing TC3 cards and aftercare instructions respectively.The intent is to eliminate the loss of information resulting from various touch-points along the continuum of care or in the days following outpatient release.Paperwor ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Medical Sensors Powered by Human Generated Energy

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: A18061

    To meet the demands of the A18-061 SBIR solicitation ("Medical Sensors Powered by Human Generated Energy"), MaXentric proposes an energy harvesting system that generates power directly from the users' body. This harvesting system, when integrated with a sensor patch, results in a system with greatly extended continuous use time allowing for application in "prolonged field care" scenarios. The enti ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Increased Capacity Retention of Silicon Anodes for Lithium Batteries


    This proposal offers a new approach to stabilizing the very high capacity Si to use for lithium ion anodes - the use of a LiSi alloy rather than only Si. By starting with a silicon alloy instead of pure silicon, the initial structure is already in a stable expanded state. Mathematically stresses encountered on charging and discharging are reduced when the silicon is partially lithiated. It has bee ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Development of an Improved General Purpose Tent Fabric

    SBC: WARWICK MILLS, INC.            Topic: A16115

    Low cost polyurethane laminate tent materials are designed to solve the cold crack issue with PVC tent fabrics. The use of novel construction of urethane/textile laminates offers a breakthrough in environmental durability over current offerings. This new high durability laminate configuration provides for a new class of economical lightweight shelters with extended operating capability.Using a com ...

    SBIR Phase II 2018 Department of DefenseArmy
  8. Innovative Bridge Launch Linkage Assembly


    The US Army currently uses the Armored Vehicle-Launched Bridge (AVLB) to temporarily span gaps in the terrain such as rivers, ravines or replace blown-up bridges. The launch system utilizes an in-bridge hydraulic cylinder and cable-pulley system to deploy and retrieve the 63-foot-long scissor type bridge. This hydraulic cylinder and cable- pulley system is bulky, heavy and adds significant load to ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. Ultra-Wideband Ultra-Low Loss Radome for Very Large Antenna Applications

    SBC: UTILITY DEVELOPMENT CORP            Topic: A18087

    The objective will be to develop and fabricate wideband low loss radome thatcan efficiently pass X-Ku Band frequencies for very large antenna applications.UDC will fabricate flat panels of the leading electromagnetic radome material candidates. Physical, electrical and magnetic properties will be tested in accordance with ASTMfor up to 150F use and 180F survive temperature. UDC will prove the feas ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Coordination and Cooperation in Ad-Hoc Networks in Congested and Contested Environments

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: A18051

    There is a definite need for tactical ad-hoc networks to understand to which degree communications can still occur in congested and contested environments where power sources are short-lived, the spectrum is limited and where jamming (both friendly and adversarial) can occur spontaneously and without warning. In this situation, network nodes will need to cooperate and coordinate negotiate ways for ...

    SBIR Phase I 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government