You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Mobile User Objective System (MUOS) for Moderate Data Rate Communications (MMDR)
SBC: W5 Technologies Inc Topic: AF171043The Mobile User Objective System (MUOS) is designed to replace UHF SATCOM with enhanced capacity and performance, modern crypto and modern protocols. The MUOS waveform is being ported to a number of software defined radios (SDRs) that will soon be fielded and capable of utilizing the MUOS network of geosynchronous satellites and ground transport. Once these radios are in place, the process of movi ...
SBIR Phase II 2018 Department of DefenseAir Force -
Spectrum Localization for Improved Situational Awareness
SBC: MAXENTRIC TECHNOLOGIES LLC Topic: AF17AT013MaXentric is developing a system architecture codenamed WATCHDOGS to improve situational awareness capabilities.The architecture includes a variety of sensor types including wideband RF receiver arrays, low-cost phased arrays, and inexpensive distributed receiver nodes.The measurements collected by the system are collaboratively processed to detect, classify, and track potential threats.MaXentric ...
STTR Phase II 2018 Department of DefenseAir Force -
Uniformed Aeroelastic ROM Realization Across Flight Parameter Space for Dynamic Flight Simulation
SBC: ZONA TECHNOLOGY INC Topic: AF161026The technical objective of the Phase II project is to develop the production-ready Dynamic Flight Simulation (DFS) system using the F-15 Saudi as a testbed and validate it with the F-15 Saudi flight test data. The key element in the DFS system is the Reduced-Order-Model (ROM)-based aeroelastic solver with an embedded aerodynamic forces database that is generated by a steady Navier-Stokes solver an ...
SBIR Phase II 2018 Department of DefenseAir Force -
Prosthesis Smart Alignment Tool: ProSAT Phase 2
SBC: ORTHOCARE INNOVATIONS LLC Topic: DHA17008This Phase 2 SBIR program will result in a commercializable and clinically tested Prosthetic Smart Auto-Alignment Tool (ProSAT), which addresses the need to facilitate rapid, accurate, quantitative, and systematic diagnosis and adjustment of the physical alignment of a prosthesis. ProSAT is a novel approach to alignment challenges by creating a hybrid sensor and smart tool system that can adjust e ...
SBIR Phase II 2018 Department of DefenseDefense Health Agency -
Biomechanical Rat Testing Device to Validate Primary Blast Loading Conditions for Mild Traumatic Brain Injury
SBC: CREARE LLC Topic: A17AT022Blast induced Traumatic Brain Injury (TBI) is a major threat to the health of military personnel serving in modern theaters. As such, the biomechanical injury pathways of TBI are, and have been, the focus of many animal studies. However, differences in the experimental setups across laboratories make it difficult to draw definitive conclusions from the resulting data. A tool that can accurately es ...
STTR Phase II 2018 Department of DefenseDefense Health Agency -
Manufacturing and Metrology of High Magnetic Permeability Materials for High Efficiency, Wideband, and Conformal RF Antennas
SBC: RAYN INNOVATIONS, LLC Topic: AF171100The critical Air Force need addressed by this effort is the enabling of high efficiency wideband (and ultrawideband) communication in a compact (conformal) form factor that minimizes (or eliminates) penalties of drag and structural reinforcement associated with conventional airborne antennas. Wideband multi-function antennas are the ideal solution to the congested spectrum problem and could lead t ...
SBIR Phase II 2018 Department of DefenseAir Force -
All-Fiber Optical Isolators for High Energy Lasers
SBC: ADVALUE PHOTONICS INC Topic: AF171108Ten kW of diffraction-limited output power has been demonstrated, which enables a wide range of new applications from laser welding, laser cutting, and laser drilling to military defense. An isolator is necessary between fiber amplifiers in order to maintain stable operation. We propose to develop and optimize all-fiber isolator using our proprietary Faraday rotation fiber with high Verdet constan ...
SBIR Phase II 2018 Department of DefenseAir Force -
All-Fiber Optical Isolator for High Energy Lasers at 2 m
SBC: N.P. PHOTONICS, INC. Topic: AF171108All-fiber optical isolators with high power handling are desired for high energy all-fiber laser systems.NP Photonics proposes to design and develop all-fiber optical isolators at the 2 m wavelength region using our unique magneto-optic glasses and innovative all-fiber designs.The proposed all-fiber isolators have the advantages of high power handling, compactness, and high reliability.In Phase I, ...
SBIR Phase II 2018 Department of DefenseAir Force -
Thermal Modeling Base High-Temperature Polymer Matrix Composite (PMC) Structural Repair
SBC: CONVERGENT MANUFACTURING TECHNOLOGIES US INC Topic: AF171112Lightweight Polymer Matrix Composites (PMCs) and metal structures in military and commercial aircraft, can often be subjected to complex damage requiring bonded repair. The current repair method involves time-consuming, costly, and often unreliable thermal surveys to control thermal uniformity which often results in tedious trial-and-error experimentation. Convergent Manufacturing Technologies US ...
SBIR Phase II 2018 Department of DefenseAir Force -
Additive Manufacturing of Freeform Optical Elements for Imaging System Weight and Volume Reduction
SBC: ADVALUE PHOTONICS INC Topic: AF171101Freeform optics is a recent, emerging and developing field to meet the increasing demands created by the high performance and ultra-compact optical imaging systems that underpin consumer and medical applications, such as mobile phones, head mounted displays, and ultrathin endoscopes. Additive manufacturing will be an ideal method to prototype freeform optics if surface quality specifications can b ...
SBIR Phase II 2018 Department of DefenseAir Force