Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Self-Aligning Prosthetic Components

    SBC: Impulse Technology, LLC.            Topic: DHA17008

    The objective of this Phase II project is to translate the proof of concept prototype developed in Phase I towards practical implementation. The focus will be on transtibial prosthetic legs. The Phase I design will be improved for bio-mechanical functionality, reliability and cost effectiveness. Full size and full load scale products will be experimentally tested and evaluated with transtibial amp ...

    SBIR Phase II 2018 Department of DefenseDefense Health Program
  2. Prosthesis Smart Alignment Tool: ProSAT Phase 2

    SBC: Orthocare Innovations LLC            Topic: DHA17008

    This Phase 2 SBIR program will result in a commercializable and clinically tested Prosthetic Smart Auto-Alignment Tool (ProSAT), which addresses the need to facilitate rapid, accurate, quantitative, and systematic diagnosis and adjustment of the physical alignment of a prosthesis. ProSAT is a novel approach to alignment challenges by creating a hybrid sensor and smart tool system that can adjust e ...

    SBIR Phase II 2018 Department of DefenseDefense Health Program
  3. Unmanned Ground & Air System for CBRNE Contaminated Personnel Recovery

    SBC: Piasecki Aircraft Corporation            Topic: A08121

    The Aerial Reconfigurable Embedded System (ARES) allows a large payload to be independently configured to meet the mission needs. This Phase II effort will develop a mission payload for use on the DARPA ARES Technology Demonstrator for a Casualty Evacuation (CASEVAC) Module.Under this effort the PiAC team will evaluate the existing pod structure to assess the integration of a single litter, medica ...

    SBIR Phase II 2018 Department of DefenseDefense Health Program
  4. Biomechanical Rat Testing Device to Validate Primary Blast Loading Conditions for Mild Traumatic Brain Injury

    SBC: CREARE LLC            Topic: A17AT022

    Blast induced Traumatic Brain Injury (TBI) is a major threat to the health of military personnel serving in modern theaters.As such, the biomechanical injury pathways of TBI are, and have been, the focus of many animal studies.However, differences in the experimental setups across laboratories make it difficult to draw definitive conclusions from the resulting data.A tool that can accurately estim ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  5. Low Voltage Radiation Hardened Optoelectronics for Optical Interconnects

    SBC: QUANTTERA LLC            Topic: DTRA152001

    The Defense Threat Reduction Agency (DTRA) recognizes the need for low-power high-bandwidth radiation-hard optical interconnects to process more data more quickly and to replace electronic data.Our companys core development in optical communications with semiconductor materials is a unique fit for DTRAs low-power consumption high-bandwidth radiation-hard intra-chip communication components for sat ...

    SBIR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  6. Enhanced Stability and Penetration Depth of Deep Earth Penetrators

    SBC: GENERAL SCIENCES INC            Topic: DTRA06009

    DTRA and other DoD agencies are currently seeking earth penetrators with higher efficiency for reaching deeply buried targets. Current penetrator materials and designs suffer from high levels of frictional drag, unbalanced resistance due to lateral forces and localized melting of the warhead leading to shape change and further instability. General Sciences, Inc. (GSI) has developed a method for en ...

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  7. The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics

    SBC: Orora Design Technologies, Inc.            Topic: DTRA07005

    Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government