You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Green Monopropellant Thruster TRL Maturation Scaling Effort

    SBC: CREARE LLC            Topic: MDA12T008

    Diode-Pumped Alkali Lasers (DPALs) have great potential for high-energy lasers. Proper design of these systems is challenging because many interrelated processes impact their performance, and critical kinetic rate coefficients are not well known. In response, our team is developing a comprehensive physics-based analysis/design tool, and experimentally determining key kinetic rate coefficients. The ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  2. Low Voltage Radiation Hardened Optoelectronics for Optical Interconnects

    SBC: Quanttera LLC            Topic: DTRA152001

    The Defense Threat Reduction Agency (DTRA) recognizes the need for low-power high-bandwidth radiation-hard optical interconnects to process more data more quickly and to replace electronic data.Our companys core development in optical communications with semiconductor materials is a unique fit for DTRAs low-power consumption high-bandwidth radiation-hard intra-chip communication components for sat ...

    SBIR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  3. Sub-Scale Fly Along Sensor Package

    SBC: Control Vision, Inc.            Topic: MDA16017

    During this SBIR program, Control Vision, Inc. will develop an innovative sub-scale Fly Along Sensor Package (sFASP) which will be deployed from a Ballistic Missile Defense System flight test target AO deployment canister. This sFASP will give unprecedented sensor visibility into Ballistic Missile Defense System test scenes providing truth data to the many different areas of Missile Defense. Appro ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  4. Programmable Multi-Frequency Transmitter

    SBC: MAXENTRIC TECHNOLOGIES LLC            Topic: MDA16T005

    To meet the demands of the MDA16-T005 STTR solicitation, the MaXentric/UTK team proposes the MaXPMFT, which exploits a wideband software defined radio architecture to create a transmitter with programmable output frequency. The flexible system will provide the ideal solution for current and future missile flight test telemetry needs through its compatibility with nearly all missile platforms and s ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  5. High Performance Actuators for Solid Propulsion Control Systems

    SBC: ELECTRIC DRIVETRAIN TECHNOLOGIES LLC            Topic: MDA16010

    The Missile Defense Agency seek solid propellant, propulsion control systems with longer operation times, increased performance, and reduced size, weight, power, and cost.Solid propellant exhaust gases are commonly 2,000-4,000F.Proportionally controlled actuators that are capable of enduring higher temperatures while aiming to maintain performance and/or reduce SWaP-C will improve the robustness o ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  6. Thermally Efficient Emitter Technology for Advanced Scene/Simulation Capability in Hardware in the Loop Testing

    SBC: ROBERT A. RICHWINE, LLC            Topic: MDA15014

    We introduce a concept and a design for a high-speed, high-temperature infrared scene projector for midwave (MWIR) and longwave infrared (LWIR) application. Results from study of carbon nanotube (CNT) material characteristics, along with field emission and electro-thermal modeling show that higheffective MWIR temperatures can be sustained and projected by a CNT pixel with little or no spillover to ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  7. The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics

    SBC: Orora Design Technologies, Inc.            Topic: DTRA07005

    Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  8. Passive IR Sensors Based on High Quantum Efficiency P-on-N Type-II Strained Layer Superlattices

    SBC: QMAGIQ LLC            Topic: MDA06013

    We propose to develop a high-performance longwave infrared focal plane array (FPA) based on Type-II InAs/(In)GaSb strained-layer-superlattice (SLS) technology and deliver it packaged in a portable handheld CAMERA. In Phase 1, a matrix of recipes was designed and grown, several wafers were processed, arrays were fabricated and characterized, and material and process issues identified. In Phase 2, ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  9. Improved Laser Diodes for Space Laser Communications

    SBC: nLight Photonics            Topic: MDA06020

    Space-based laser systems require unsurpassed reliability and ruggedness, as space-deployment may make it impossible to service and repair deployed systems. In this program we propose to continue our Phase I investigation to systematically identify, address and eliminate the most significant failure points in space-deployed diode laser systems. We will replace these points of failure with evoluti ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  10. Lightweight, Corrosion Resistant Valve Materials

    SBC: UTILITY DEVELOPMENT CORP            Topic: MDA06055

    The main objective will be to optimize and improve the reliability and reduce the overall system weight for the numerous currently pneumatically actuated flight qualified valves. The Phase I formulations of lightweight and chemical resistant composites will be optimized for performance and ease of fabrication into valve components. Prototype valves will be fabricated and tested. Extensive te ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government