You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
XpressRules-PM: Commercial Implementation of PM/NGAC
SBC: XpressRules LLC Topic: NANew Generation Access Control (NGAC)—because of its “neutrality by design”—represents the most effective and scalable approach for deploying “smart” access control and consent solutions in large dynamic scenarios. NGAC however presents with its own problems: (1) it has miniscule recognition and uptake in the workplace, (2) it is unusable by non-technical policy officers and (3) its doc ...
SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology -
Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics
SBC: SENVOL LLC Topic: NAAdditive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...
SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology -
Tomographic Nanoscopy for Pathogen Identification
SBC: SOLID STATE SCIENTIFIC CORPORATION Topic: CBD171003This effort will augment the capabilities of an existing all reflecting, confocal FTIR microscope to allow for digital holographic imaging as wellspectral content determination at video frame rates. The use of a dual beam frequency comb, with a beam path coincident with the pathrequired for the digital holographic imaging, will allow spectral determination of any organism being holographically ima ...
SBIR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense -
Hermetic Seals for Chemical/Biological Protective Garments
SBC: CREARE LLC Topic: CBD13109Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare is developing hermetic garment closure systems that seal macroscopic and microscopic gaps at interfaces and closures and provide high ...
SBIR Phase II 2018 Department of DefenseOffice for Chemical and Biological Defense -
Omni-Directional, Wind and Water Tolerant Inlet for the DFU
SBC: ENERTECHNIX, INC. Topic: CBD07116The current DFU inlet exhibits poor aerosol sampling efficiency at high wind speeds. This project will develop an improved inlet with very high sampling efficiency for 1 to 20 micron particles at wind speeds up to 30 mph independent of wind direction. The project is focused on the DFU, but our Aerodynamic Next Generation Inlet (ANGI) will be beneficial for any high volume aerosol sampling applicat ...
SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense -
Automated Objective Speech Intelligibility Assessment System
SBC: LI CREATIVE TECHNOLOGIES INC Topic: CBD07106Based on the success of our Phase I feasibility research, we propose to continue the project for the automated objective speech intelligibility assessment system. It consists of a pair of head and torso simulators placed at the same distance as typical face-to-face communication, a power amplifier, a laptop computer, a speech recognizer, and console software. The simulator has acoustic properties ...
SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense -
Lightweight, Efficient Blower for Personal Air Ventilation System
SBC: CREARE LLC Topic: CBD07115A personal air ventilation system (PAVS) can dramatically improve the environment inside chemical/biological protective clothing, protecting the health and safety of soldiers and enabling peak physical/mental performance for long periods. However, existing air blowers that can produce the flow rate and pressure drop needed for a PAVS are too heavy, inefficient, and noisy for a man-portable system ...
SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense -
Low Noise, InGaAs Dual Photodiodes for Precise Timing
SBC: DISCOVERY SEMICONDUCTORS, INC. Topic: N/AConversion of highly stable optical clocks into electrical clocks through photodetection introduces excess phase noise and degrades the frequency stability by two to three orders of magnitude.
SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology -
Extended Refreshable Tactile Graphic Display (with Linear Actuation Array)
SBC: E L I A Life Technology Inc Topic: N/ANew innovative technology for the visually impaired has been developed by NIST. If commercialized, it would provide refreshable tactile graphical information to the visually impaired, enabling them to compete on a more equal footing in the workplace and the education system.
SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology -
Innovative Fire Measurements Using Thermal Imaging
SBC: CRITICAL IMAGING, LLC Topic: N/AThe most practical arrangement for investigating moving fires within a restricted space is to use a high- resolution stand off technique. One such method that fits this description is the use of a staring infrared (IR) sensing device (i.e. imager).
SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology